2763 - CNC Bedmills, Lathes, General Workshop Equipment and Ancillaries no longer required by Torneria Meccanica Raimondi Pierangelo, Italy
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +39 0732 677 063 or email us at: info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 129
Przedmiot 1: MTE BF-2700 CNC Bedmill
MTE BF-2700 CNC Bedmill, Model with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor. S/No. 0524598 (2004)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 1A: Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 1B: Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 1, 1A & 1B
Combination of Lots 1, 1A & 1B
Fresatrice A Banco Fisso CNC Bedmill, Model MTE BF-2700 with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor
Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 4: Awea Model AW4567/03 Vertical Machining Centre
Awea Model AW4567/03 Vertical Machining Centre with Fanuc Series 18i-MB Control, 24-Station Tool Changer, Table Size 1250mm x 610mm (2003)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 5: Supermax Twin Pallet Model YCM V85A Vertical Machining Centre
Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 5A: Qty of CAT40 Tooling and Collets
Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 5B: Cupboard with CAT40 Tooling
Cupboard with CAT40 Tooling and Cutters and Electrical Components
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 5C: Tapping Attachment
Tapping Attachment
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lot 5, 5A, 5B & 5C
Combination of Lot 5, 5A, 5B & 5C
Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)
Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)
Cupboard with CAT40 Tooling and Cutters and Electrical Components
Tapping Attachment
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
5 | Supermax Twin Pallet Model YCM V85A Vertical Machining Centre |
5A | Qty of CAT40 Tooling and Collets |
5B | Cupboard with CAT40 Tooling |
5C | Tapping Attachment |