2700 - CNC, Conventional & Toolroom Equipment no longer required by Advanced Mould Tooling Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
This Auction has a strict clearance date of Thursday 8th November 2018 – The site must be completely cleared by this date.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 105
Lot 1: Fadal 4525 Vertical Machining Centre
Fadal 4525 Vertical Machining Centre with Siemens Control Model No. 922-1, Table size 1360mm x 640mm, 24 Station ATC, BT40 Tooling. S/No. 012000010150 (2000)
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 1A: BT40 Tooling
BT40 Tooling
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 1b: BT40 Tooling
BT40 Tooling
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 1, 1A & 1B
Combination of lots 1, 1A & 1B
Fadal 4525 Vertical Machining Centre with Siemens Control Model No. 922-1, Table size 1360mm x 640mm, 24 Station ATC, BT40 Tooling. S/No. 012000010150 (2000)
and
BT40 Tooling
and
BT40 Tooling
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
1 | Fadal 4525 Vertical Machining Centre |
1A | BT40 Tooling |
1b | BT40 Tooling |
Lot 2: Matchmaker Fadal 6030 Vertical Machining Centre
Matchmaker Fadal 6030 Vertical Machining Centre with Fadal CNC 88HS Control Model 907-1, Table size 1590mm x 760mm, 30 Station ATC, BT40 Tooling. S/No. 9503408 (1995)
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 2A: BT 40 Tooling
BT 40 Tooling
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 2 & 2A
Combination of lots 2 & 2A
Matchmaker Fadal 6030 Vertical Machining Centre with Fadal CNC 88HS Control Model 907-1, Table size 1590mm x 760mm, 30 Station ATC, BT40 Tooling. S/No. 9503408 (1995)
and
BT 40 Tooling
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
2 | Matchmaker Fadal 6030 Vertical Machining Centre |
2A | BT 40 Tooling |
Lot 3: Matchmaker Fadal 6030 Vertical Machining Centre
Matchmaker Fadal 6030 Vertical Machining Centre with Fadal CNC 88HS Control Model 907-1, Table size 1590mm x 760mm. S/No. 9501807 (1995)
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lot 4: Matchmaker Fadal 15 Vertical Machining Centre
Matchmaker Fadal 15 Vertical Machining Centre with Fadal CNC 88HS Control Model No. 914 – 15, Table size 750mm x 410mm, 21 Station ATC, BT40 Tooling. S/No. 9508635 (1995)
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Lot 5: Matchmaker Fadal 4020 Vertical Machining Centre
Matchmaker Fadal 4020 Vertical Machining Centre with Fadal CNC 88 Control Model No. 906-1, Table size 1220mm x 510mm, 21 Station ATC, BT40 Tooling. S/No. 9006325
Please Note: In need of repair
Please Note: This lot is located in Leicester, unfortunately there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.