Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996)

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Emco Emcoturn 395-II CNC Lathe with Siemens Sinumerik 810D Powerline Control, 100m Collet Chuck, 12 Tool Turret, Power Tail Stock, MAchining Total Run Time - 6461 Hours. S/No. R2A-V13 (2004) Emco LM800 Bar Feed, Uniop Control. S/No. EO368 (2007) includes Autoblok 3 Jaw Chuck, Tooleye System and Selection of Static and Driven Tooling

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Qty of VDI 30 Static and Driven Tooling

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Combination of lots 13 & 13A

Lot 13 - Emco Emcoturn 395-II CNC Lathe with Siemens Sinumerik 810D Powerline Control, 100m Collet Chuck, 12 Tool Turret, Power Tail Stock, MAchining Total Run Time - 6461 Hours. S/No. R2A-V13 (2004) Emco LM800 Bar Feed, Uniop Control. S/No. EO368 (2007) includes Autoblok 3 Jaw Chuck, Tooleye System and Selection of Static and Driven Tooling

Lot 13A - Qty of VDI 30 Static and Driven Tooling

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 100mm Collet Chuck, Power Tailstock, 12 Tool Turret. S/No. R35-V03-BAM (1996) Run Time 2001 Hours, Hydrafeed Bar Feed. S/No. 9349 (1996) inlcudes Tool setter, Selection of Tooling and Collets.

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Quantity of VD1 20 Tooling

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. 

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Emco Turn 342 CNC Lathe with Fanuc O-T Control, 2 Axis, 100mm Collet Chuck, 8 Tool Turret. S/No. R3R E3ES 013 S, Sameca Barfeed Type MO4.6.5. S/No. 174 (1995) includes Autoblok Chuck, Selection of Tooling & Collets

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Emco Turn 325 CNC Lathe with Fanuc OT Control, 2 Axis, 50mm Collet Chuck, 8 Tool Turret and Sameca Bar Feed S/No. A7O V01 (1997), Sameca Barfeed Type SAM45. S/No. 804 4 100 (1994)

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

Emco Turn 320 CNC Lathe with Fanuc OT Control, 2 Axis, 50mm Collet Chuck, 8 Tool Turret. S/No. A75 V03

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf