3285 - Large Capacity Correa FP40 Bridge Type & Hurco DCX32 Double Column Machining Centres formerly used by Cube Precision Engineering

Engineering

L'enchère s'est terminée le

jeudi 15 févr. 2024 at 03:00PM (GMT)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Rowley Regis, West Midlands, UK. Unfortunately there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

19 févr. 2024 at 17:00 (GMT)

'Date limite d''apurement'

29 févr. 2024 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-4 de 4

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
15 févr. 2024 16:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1: Correa FP40 Bridge Type Milling Machine (2007)

Correa FP40 Bridge Type Milling Machine with Heidenhain TNC530 Control, Table Size 4500 x 2000mm, Max Table Weight 10,000kgs, X/Y/Z = 4000/3000/1000mm, Universal Head, Spindle Taper ISO 50, Approx Machine Weight 35,500kgs. S/No. 895235 (2007). Country of Origin: Spain

Please Note: This lot is located in Rowley Regis, West Midlands, UK. Unfortunately there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will ...

Preview image
Fin:
15 févr. 2024 16:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 2: Hurco DCX32/50T Double Column Machining Centre

Hurco DCX32/50T Double Column Machining Centre with Ultimax Control, Table Size: 3000mm x 1700mm, Max. Table Weight: 11000kg, Spindle Speed: 10000RPM, Spindle Taper: CAT 50, Tool Capacity: 40 Pockets, X-Axis Travel: 3200mm, Y-Axis Travel: 2100mm, Z-Axis Travel: 920mm, Renishaw Probe, Swarf Conveyor. S/No. MC34-16101052A446 (2012). Country of Origin: Taiwan

Please Note: This lot is located in Rowley Regis, West Midlands, UK. Unfortunately there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will ...

Preview image
Fin:
15 févr. 2024 17:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3: Hurco VMX64/50T Vertical Machining Centre (2003)

Hurco VMX64/50T Vertical Machining Centre with Ultimax Control, X-Axis Travel: 1625mm, Y-Axis Travel: 860mm, Z-Axis Travel: 760mm, Table length 1676 x 889mm, 40 Position ATC, Spindle taper INT 50, Max Spindle speed 12,000rpm, Swarf Conveyor. S/No. M653-66101063011A (2003). Country of Origin: Taiwan

Please Note: This lot is located in Rowley Regis, West Midlands, UK. Unfortunately there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods ...

Preview image
Fin:
15 févr. 2024 17:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4: Charmilles Robofil 310 Wire Eroder (1996)

Charmilles Robofil 310 Wire Eroder, X Axis = 400mm, Z Axis = 400mm, Approx Max Workpiece Width 500mm, Y Axis = 250mm, Approx Max Workpeice Length 850mm. S/No. 6.2538/355 056 (1996). Country of Origin: Switzerland

Please Note: This lot is located in Rowley Regis, West Midlands, UK. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories