DAVI MCB 3090 Four Roll Plate Bending Rolls with Davi CNC Control, Rolls Width 3100mm, Planetary Prebending, Servo-tronic Parallel Control, Nominal 3m x 120mm MS Cap, Roller Infeed Scissor Table with Entry Lift Facility. S/No. 21040126 (2011). Country of Origin: Italy

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-Burner Gas Cutting Heads per Frame, Vision Control System, Leuze Light Guards, 8m x c.17m Long Cutting Area, 1 x triple, 1 x Double Burner Gas Cut Heads Fitted. S/No. 21010378 (2010). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-burner Gas Cutting Heads per Frame Vision Control System, 8m x c.17m Long Cutting Area, 1 x Triple Fitted & 1 x 3 Burner Cut Heads not Fitted. S/No. 21010379 (2010). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of Lots 2 & 2A

Lot 2 - ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-Burner Gas Cutting Heads per Frame, Vision Control System, Leuze Light Guards, 8m x c.17m Long Cutting Area, 1 x triple, 1 x Double Burner Gas Cut Heads Fitted. S/No. 21010378 (2010). Country of Origin: Germany

and

Lot 2A - ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-burner Gas Cutting Heads per Frame Vision Control System, 8m x c.17m Long Cutting Area, 1 x Triple Fitted & 1 x 3 Burner Cut Heads not Fitted. S/No. 21010379 (2010). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Source, Flux Recovery System, 1 x 1303 DC & 3 X 1003 DC Power Supply. (Please Note: Weld Heads, Fluxing Units and Pipes Missing Some Cards in Rectifiers). S/No. 00361004825 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Sources, Flux Recovery System. S/No. 00361004824 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 3 & 3A

Lot 3 - Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Source, Flux Recovery System, 1 x 1303 DC & 3 X 1003 DC Power Supply. (Please Note: Weld Heads, Fluxing Units and Pipes Missing Some Cards in Rectifiers). S/No. 00361004825 (2010). Country of Origin: France

and

Lot 3A - Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Sources, Flux Recovery System. S/No. 00361004824 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 Unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No.00361004866 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219-0102 (2011). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 4 & 4A

Lot 4 - Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 Unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No.00361004866 (2010). Country of Origin: France

and

Lot 4A - ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219-0102 (2011). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.