3056 - Unique Opportunity: Offshore Wind Turbine Transition Piece Manufacturing & Fabrication Machinery no longer required by Wilton Group
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Virtual Tour
Auction Brochure
Offers are invited for Individual Machines or as a Whole Facility prior to Auction, please contact our office for further information: Telephone our Office on + 44 (0) 121 328 2424 or email us at info@cottandco.com
Please Note: These lots are located in Middlesbrough, UK. for some of the equipment Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. Please see each idividual lot for its loading information.
All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 133
Lot 1: DAVI MCB 3090 Four Roll Plate Bending Rolls
DAVI MCB 3090 Four Roll Plate Bending Rolls with Davi CNC Control, Rolls Width 3100mm, Planetary Prebending, Servo-tronic Parallel Control, Nominal 3m x 120mm MS Cap, Roller Infeed Scissor Table with Entry Lift Facility. S/No. 21040126 (2011). Country of Origin: Italy
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it ...
Lot 2: ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter
ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-Burner Gas Cutting Heads per Frame, Vision Control System, Leuze Light Guards, 8m x c.17m Long Cutting Area, 1 x triple, 1 x Double Burner Gas Cut Heads Fitted. S/No. 21010378 (2010). Country of Origin: Germany
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter
ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-burner Gas Cutting Heads per Frame Vision Control System, 8m x c.17m Long Cutting Area, 1 x Triple Fitted & 1 x 3 Burner Cut Heads not Fitted. S/No. 21010379 (2010). Country of Origin: Germany
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 2 & 2A
Combination of Lots 2 & 2A
Lot 2 - ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-Burner Gas Cutting Heads per Frame, Vision Control System, Leuze Light Guards, 8m x c.17m Long Cutting Area, 1 x triple, 1 x Double Burner Gas Cut Heads Fitted. S/No. 21010378 (2010). Country of Origin: Germany
and
Lot 2A - ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter with 1 x Plasma and 2 x Triple-burner Gas Cutting Heads per Frame Vision Control System, 8m x c.17m Long Cutting Area, 1 x Triple Fitted & 1 x 3 Burner Cut Heads not Fitted. S/No. 21010379 (2010). Country of Origin: Germany
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter |
| 2A | ESAB Suprarex SXE-P4-8500 Portal Frame CNC Profile Cutter |
Lot 3: Air Liquide Beam WM40 Sub-Arc Plate Welding Plant
Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Source, Flux Recovery System, 1 x 1303 DC & 3 X 1003 DC Power Supply. (Please Note: Weld Heads, Fluxing Units and Pipes Missing Some Cards in Rectifiers). S/No. 00361004825 (2010). Country of Origin: France
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Air Liquide Beam WM40 Sub-Arc Plate Welding Plant
Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Sources, Flux Recovery System. S/No. 00361004824 (2010). Country of Origin: France
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 3 & 3A
Combination of lots 3 & 3A
Lot 3 - Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Source, Flux Recovery System, 1 x 1303 DC & 3 X 1003 DC Power Supply. (Please Note: Weld Heads, Fluxing Units and Pipes Missing Some Cards in Rectifiers). S/No. 00361004825 (2010). Country of Origin: France
and
Lot 3A - Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Sources, Flux Recovery System. S/No. 00361004824 (2010). Country of Origin: France
Please Note: This lot is located ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 3 | Air Liquide Beam WM40 Sub-Arc Plate Welding Plant |
| 3A | Air Liquide Beam WM40 Sub-Arc Plate Welding Plant |
Lot 4: Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System
Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 Unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No.00361004866 (2010). Country of Origin: France
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 4A: ESAB CD-60 Drive Rollers & Idler Rollers
ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219-0102 (2011). Country of Origin: Germany
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 4 & 4A
Combination of lots 4 & 4A
Lot 4 - Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 Unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No.00361004866 (2010). Country of Origin: France
and
Lot 4A - ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219-0102 (2011). Country of Origin: Germany
Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 4 | Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System |
| 4A | ESAB CD-60 Drive Rollers & Idler Rollers |