3030 - Akira Seiki and Fagima Machining Centres, Takisawa, Daewoo, Comev Picodue and Poreba Lathes and Ancillary Factory Items
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 51-60 z 191
Przedmiot 63: Kitagawa BB208 210mm 3-Jaw Self-Centering Chuck
Kitagawa BB208 210mm 3-Jaw Self-Centering Chuck. Country of Origin: Japan
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 64: SMW Autoblok 210 BH 210mm 3-Jaw Self-Centering Chuck
SMW Autoblok 210 BH 210mm 3-Jaw Self-Centering Chuck. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 65: Serrmac TCS 40 Drill with Digit D.R.O
Serrmac TCS 40 Drill with Digital D.R.O, 3-Axis with Cross Table, Precision Modular Clamp, Type 4 Clamp Cone, Complete with Chip Collecting Tank and Set of Toolholders. S/No. 991787 (1999. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 65A: (2) x Precision Modular Vices
(2) x Precision Modular Vices. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *65 & 65A: Combination of lots 65 & 65A
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
65 | Serrmac TCS 40 Drill with Digit D.R.O |
65A | (2) x Precision Modular Vices |
Przedmiot 66: Dividing Head, 200mm diameter
Dividing Head, 200mm diameter. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 67: Wicker Single Phase AC220 Sharpening Machine
Wicker Single Phase AC220 Sharpening Machine. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 68: Wicker Single Phase AC220 Sharpening Machine
Wicker Single Phase AC220 Sharpening Machine. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 69: (1) x 160mm Vice & (1) x 200mm Vice
(1) x 160mm Vice & (1) x 200mm Vice. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 70: Serrmac TCS 3-Axis Drill with Cross Table
Serrmac TCS 3-Axis Drill with Cross Table, Machine Vice, 3-Jaw Chuck & Coolant Tray. S/No. 70587 (2007). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.