2979 - CNC Lathes, Machining Centres and EDM Machines, Conventional Machinery and Ancillaries previously used by Protool Manufacturing Ltd

Engineering

L'enchère s'est terminée le

2021-03-24 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2021-03-26 17:00:00.0

'Date limite d''apurement'

2021-04-08 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 102

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
24 mars 2021 15:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 1: ONA NX6 Spark Eroder (2016)

ONA NX6 Spark Eroder (2016) S/No. 12321 with CNC Control Unit, Work Table XY 1,200 x 800mm, Consisting of Machine-Tool, Microfine Generator for very fine surface finishing (VDI=0), Dielectric Filtration System, X, Y, Z Axis Travel: 1,000 x 600 x 500mm, C axis: 360 degrees, Work Tank dimensions: 1,700 x 1,000 x 600mm, Rise & Fall Door, C axis with Automatic System 3R Chuck, 9 positions Automatic Tool Changer, Ona’s Ecological Long-life Filter, Generator 100 Amps, Dielectric Cooler. (All vices are excluded from the Machine) Country of Origin: Spain

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of ...

Preview image
Fin:
24 mars 2021 16:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 1A: 3R Tooling Plates and Stems

3R Tooling Plates and Stems, (Excluding Copper Tooling) Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Preview image
Fin:
24 mars 2021 16:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 1B: 3R Tooling Plates and Stems

3R Tooling Plates and Stems, (Excluding Copper Tooling) Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Preview image
Fin:
24 mars 2021 16:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 1C: 3R Tooling

3R Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Preview image
Fin:
24 mars 2021 17:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 2: Correa Diana 20 Bed Mill Machine (2006)

Correa Diana 20 Bed Mill Machine (2006) Type Diana 20 with 530 Heidenhain Control, 20 - 3000rpm Spindle Speed, Table size 2m x 900mm, CAT50 Tooling. S/No. 624007 (All vices are excluded from the Machine). Country of Origin: Spain

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be ...

Preview image
Fin:
24 mars 2021 16:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 2A: Centreline Spindle Speeder

Centreline Spindle Speeder. S/No. 005710. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Preview image
Fin:
24 mars 2021 15:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 3: Dugard 850 Vertical Machining Centre

Dugard 850 Vertical Machining Centre Model 850 VMC with Heidenhain 530 Control, Table Size 1m x 510mm, BT40 Tooling, 24 Station Tool Changer. S/No. FML14BE05. (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be ...

Preview image
Fin:
24 mars 2021 16:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 4: YCM XV560A Vertical Machining Centre (2011)

YCM XV560A Vertical Machining Centre (2011) with Heidenhain 530 Control, Table size 700mm x 420mm, 20 Station Tool Changer, BT40 Tooling. S/No. 0341 (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing ...

Preview image
Fin:
24 mars 2021 16:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 5: YCM XV560A Vertical Machining Centre (2011)

YCM XV560A Vertical Machining Centre (2011) with Heidenahin 530 Control, Table size 700mm x 420mm, 20 Station Tool Changer, BT40 Tooling. S/No. 0351 (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing ...

Preview image
Fin:
24 mars 2021 15:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 6: Johnford SV-41 Machining Centre

Johnford SV-41 Machining Centre with Heidenhain 530 Control, 24 Station Tool Changer, BT40. S/No. MBB11482 (2011) (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories