2861 - Final Phase – TOS Plano Mill, Skoda & TOS Lathes, TOS Grinder, Holroyd Milling Machines, Welders & Various Capacity Overhead Cranes surplus to the ongoing requirements of Howden CKD Compressors s.r.o.

En collaboration avec

Engineering

L'enchère s'est terminée le

2020-02-26 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2020-02-28 17:00:00.0

'Date limite d''apurement'

2020-03-12 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 11-20 de 29

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
26 févr. 2020 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 44: Qty of ISO 60 Tooling

Qty of ISO 60 Tooling

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 45: Qty of ISO 60 Tooling with Racking

Qty of ISO 60 Tooling with Racking

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 233: MEZ Brumov WTU 315-30 Mig Welder

MEZ Brumov WTU 315-30 Mig Welder. S/No. 26893 (1989)

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 234: MEZ Brumov WTU 315-30 Mig Welder

MEZ Brumov WTU 315-30 Mig Welder. S/No. 88-16732 (1986)

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 235: REHM Trans Wig 200G Welder

REHM Trans Wig 200G Welder. S/No. 044194

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 236: ESAB Aristo 400 Arc Welder

ESAB Aristo 400 Arc Welder. S/No. 445-517-6216

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 237: Trafco II Transformer

Trafco II Transformer

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 238: Chuck Jaws with Riser Plates for CKD Blansko VTL

Chuck Jaws with Riser Plates for CKD Blansko VTL

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 239: Chuck Jaws with Riser Plates for CKD Blansko VTL

Chuck Jaws with Riser Plates for CKD Blansko VTL

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
26 févr. 2020 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 240: Chuck Jaws with Riser Plates for CKD Blansko VTL

Chuck Jaws with Riser Plates for CKD Blansko VTL

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories