2834 - Haas ST-30T CNC Lathe, Agie Wire Eroders, Saws and Drills no longer required by CT Precision & Others

Engineering

'L''enchère se termine le'

mercredi 13 nov. 2019 at 03:00PM (GMT)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Please Note: These lots are located in Birmingham. Please see individual lots for loading charges and information.

Buyer's premium

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

15 nov. 2019 at 17:00 (GMT)

'Date limite d''apurement'

28 nov. 2019 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 16

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
13 nov. 2019 15:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
23
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1: Haas ST30T CNC Lathe

Haas ST-30T CNC Lathe with Haas Control, Advanced 30HP Vector Drive Spindle, Max 3400rpm, Servo Driven, Automatic, 12 Position Turret, 10" Hydraulic 3 Jaw Chuck, Foot and Programme Activated, Fully Programmable Tailstock, Swarf Conveyor, Parts Catcher, 32mm 0/|Diameter,  x = 533, Z = 660mm, Standard Toolkit. S/No. 3099335 (2014)

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 15:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£50
Enchères:
8
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1A: Hydrafeed MV65 Barfeed

Hydrafeed MV65 Barfeed. S/No. 16110189

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £70 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 15:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
54
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 2: Agie Charmilles Cut E 350 Wire Eroder

Agie Charmilles Cut E 350 Wire Eroder, Max Work Piece Dimensions 820mm W x 680mm D x 250mm H, Work Table 700mm x 480mm, Axis Travel X = 350mm  Y = 250mm Z = 250mm, Axis Travel U = 90mm  V = 90mm, Axis Speed 0...3000. S/No. 3969001700130 (2016)

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 16:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
10
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3: Agie Cut Challenge 3 Wire Eroder

Agie Cut Challenge 3 Wire Eroder with Chiller, Table size 850mm x 550mm. S/No. 149 (2000) 

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
14
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4: Agie Elox Mondo 20 Spark Eroder

Agie Elox Mondo 20 Spark Eroder, Table Size 400mm x 300mm, Tank Size 600mm x 400mm x 300mm Depth. S/No. M20 THK-005241 

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 16:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
22
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 5: Sodick K1C Smallhole Drilling EDM

Sodick K1C Smallhole Drilling EDM with X-ACT SD52 Control, Table Size 350mm x 250mm

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
7
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 6: Startrite HB225M Saw

Startrite HB225M Saw. S/No. 136537

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £100 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
13
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 7: Pedrazzolli Chop Saw

Pedrazzolli Chop Saw

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2019 15:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
8
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 8: Delapena Speed Hone

Delapena Speed Hone. S/No. 2306/50

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £100 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
13 nov. 2019 15:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£50
Enchères:
6
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 9: Guyson Shot Blast Model DBH6

Guyson Shot Blast Model DBH6, Working Area 1m x 700mm x 800mm High with Extraction Unit

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £100 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories