2821 - CNC Machining Centres & Lathes, Butler Elgamill, Borers, Milling Machines, Grinders and Toolroom Equipment previously used by Cyrus Engineering
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Wales.
Lots 2, 8 & 13 are located in Glamorgan all other lots are located in Swansea. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 95
Lot 1: Everricho HD 1886B Vertical Machining Centre
Everricho HD 1886B Vertical Machining Centre with Fanuc 0i-MD Control, Table Size 1.8m x 860mm, 32-Station Tool Changer. S/No. 1886B-001 (2011)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: Equipitop EMV 860 CNC Machining Centre
Equipitop EMV 860 CNC Machining Centre with Mitsubishi Control, table size 900mm x 560mm, 24 Station Tool Changer, BT40 Tooling
Please Note: This lot is located in Glamorgan, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 3: Mikron VC1000C Vertical Machining Centre
Mikron VC1000C Vertical Machining Centre with Heidenhain TNC 407 Control, Table Size 1080mm x 580mm, Swarf Conveyor, 40-Station Tool Changer, Tool Holders. S/No. 142.11.80.8XX
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: Dugard Model 1300 Vertical Machining Centre
Dugard Model 1300 Vertical Machining Centre with Fanuc 0-MD Control, 20-Station ATC, Table Size 1450mm x 570mm. S/No. ML903003
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: Yang Eagle SMV-1000 Vertical Machining Centre
Yang Eagle SMV-1000 Vertical Machining Centre with Fanuc O-MD Control, Table Size 1070mm x 500mm, 3 Axis, Qty Tool Holders. S/No. Z10846 (1999)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 6: Butler Newall 3000 Elgamill Type Milling Machine
Butler Newall 3000 Elgamill Type Milling Machine with Heidenhain TNC 415 Control, Table Size 3.1m x 1.2m. S/No. 70011
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 7: Sculfort Supercap Senior 750 4000R Gap Bed Centre Lathe
Sculfort Supercap Senior 750 4000R Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 1m 4-Jaw Chuck, Distance between centres 4m, 3-Jaw Steady. S/No. 125753
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 8: Butler Bed Mill
Butler Bed Mill, Table size 6m x 1.2m, Fagor Dro. S/No. 25907
Please Note: This lot is located in Glamorgan, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 9: Poreba TR115B2/5M Gap Bed Centre Lathe
Poreba TR-115 B2/5M Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 1m 4-Jaw Chuck, 5m Distance between centres, 2 3-Point Steadies. S/No. 7402-01-09031-07
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 10: Poreba TRP 93 x 4m Gap Bed Centre Lathe
Poreba TRP 93 x 4m Gap Bed Centre Lathe with (2) x 3 Point Steady, 400mm Distance between centres, 4-Jaw Chuck 800mm. S/No. 7402-06-07008-00 (1998)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.