Colchester Triumph VS 2500 Straight Bed Centre Lathe, Swing Over Bed 400mm, Swing Over Saddle 246mm, Distance Between Centres 1250mm, Spindle Bore 54mm, Speeds 0 - 2500rpm, Variable, Imperial Leadscrew & Dials, Tailstock 5 MT, QCTP, 3 & 4 Jaw Chucks, Face Plate, Anilam Wizard DRO

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Viking Type VT400 Gap Bed Centre Lathe, Swing Over Bed 400mm, Swing in Gap 520mm, Distance Between Centres 1100mm, Spindle Bore 50mm, Spindle Speeds 33-2000rpm, 3 & 4 Jaw Chuck, Steady, Face Plate & Drive Plate, QCTP, Ex. University

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Harrison M300 Gap Bed Centre Lathe, Swing Over Bed 13", Swing in Gap 19", Distance Between Centres 40", Spindle Speeds 40 -2500rpm, Spindle Bore 1 3/8" 3 & 4 Jaw Chucks, 3 Point Steady, 3 Axis DRO and QCTP

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Iemca Type 16 Model 80 Short Bar Magazine Bar Feeder (2009)

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Iemca Type 16 MODEL 80 Short Bar Magazine Bar Feeder (2008)

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

LNS Turbo Model 44758014E Swarf Conveyor, width 8", Trough Size 40" x 12", Drop Height 48", Variable Speed (2011)

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Myford MG12-HA Hydraulic Cylindrical Grinder, Maximum Grinding Capacity 3" Diameter, Swing Over Table 5", Max Table Travel 13 3/4", Capacity Between Centres 12", Hydraulic Table Traverse 0-120" min

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman Type 1011 Toolroom Surface Grinder, Capacity 27" x 12", Table 27" x 11", Power & Rapids to Wheelhead, Single Axis DRO on Vertical Movement

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman Type 540L Toolroom Surface Grinder, Power Rise & Fall, Capacity 18" x 6", Height Under New Wheel 16", Mag Chuck 350 x 150mm, Dual Dials

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman 540P Surface Grinder, Capacity 18" x 6", Power Feed Rise and Fall to Wheel Head with Mag Chuck

Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.