2814 - Doosan Puma, Daewoo, Leadwell Lathes and Machining Centres, Mills, Drills and Grinders no longer required by Omal Srl Italy
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These lots are located in Banzi PZ, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 21-30 z 107
Przedmiot 106: Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre
Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre with Fanuc Series 18-M Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 700mm Table Size. S/No. AV650231 (2000)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 106A: Cabinet with CAT 50 Tooling
Cabinet with CAT 50 Tooling
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 106 & 106A
Combination of Lots 106 & 106A
106 - Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre with Fanuc Series 18-M Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 700mm Table Size. S/No. AV650231 (2000)
and
106A - Cabinet with CAT 50 Tooling
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
106 | Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre |
106A | Cabinet with CAT 50 Tooling |
Przedmiot 107: Leadwell MCV-760BP CNC Vertical Machining Centre
Leadwell MCV-760BP CNC Vertical Machining Centre with Fanuc Series O-M Control, 4th Axis Unit 270mm, Tailstock, 3 Jaw Chuck, 1000mm x 500mm Table Size. S/No. L1S1E 0830 (1995)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 108: Leadwell V-20 CNC Vertical Machining Centre
Leadwell V-20 CNC Vertical Machining Centre with Fanuc Series O-MD Control, 16 Station Tool Changer, 250mm 3 Jaw Chuck on Table, Table Size 600mm x 350mm, Qty of BT 40 Tooling. S/No. L2TJB0038 (06/2002)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 108A: Elbo PV2 Control Tool Setter
Elbo PV2 Control Tool Setter. S/No. 71122
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 108 & 108A
Combination of lots 108 & 108A
108 - Leadwell V-20 CNC Vertical Machining Centre with Fanuc Series O-MD Control, 16 Station Tool Changer, 250mm 3 Jaw Chuck on Table, Table Size 600mm x 350mm, QTY of BT 40 Tooling. S/No. L2TJB0038 (06/2002)
and
108A - Elbo PV2 Control Tool Setter. S/No. 71122
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
108 | Leadwell V-20 CNC Vertical Machining Centre |
108A | Elbo PV2 Control Tool Setter |
Przedmiot 109: Tacchella Electra 1523-CNC Trade Grinder
Tacchella Electra 1523-CNC Trade Grinder with GE Fanuc Series 180-T Control 400mm Wheel Size, Tooling, 100mm 3 Jaw Steady, 150mm 3 Jaw Steady, 200mm 3 Jaw Steady, Filtration Unit. S/No. 6765 (2002)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 110: Grisetti Grinder
Grisetti Grinder, 160mm 3 Jaw Chuck, 200mm 3 Jaw Chuck Distance between Centres 1200mm, 320mm Wheel Size, Internal and External Grinding
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 111: Tur 630m Lathe
Tur 630m Lathe, 380mm 3 Jaw Chuck, Distance between Centres 2m, Quick Change Tooling, (2) 3 Point Steadies. S/No. 48982
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.