2801 - Bohner Kohle Vertical Milling Machine, Anayak Bed Mill, Nakamura-Tome and Tos Lathes no longer required
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Gloucester and Tamworth. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-4 de 4
Lot 101: Boko WF2/10 Bohner Kohle WF2/10 NC Vertical Milling Machine
Boko WF2/10 Bohner Kohle WF2/10 NC Vertical Milling Machine with Heidenhain TNC 426 CA Control, Spindle Speed 45-3550rpm, Axis Travels X=1500mm Y=1000mm Z=700mm W=300mm C=360 Degrees, ISO50 Spindle Taper, Table Dimensions 1000mm x 1500mm, Manual Horizontal Head. S/No. 681 (1996)
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 102: Anayak FBZ-HV-2500 Travelling Column Bed Mill
Anayak FBZ-HV-2500 Travelling Column Bed Mill with Heidenhain TNC 426 CA Control, Spindle Speed 3000rpm, Axis Travels X=2500mm Y=815mm Z=800mm 4th Axis Rotary Table Dimensions 800 x 800mm, ISO50 Spindle Taper, Universal Manual Head, Table Dimensions 2900mm x 800mm. S/No. 12446-FBZ (1996) (Note Fixtures Not Included)
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 103: Nakamura-Tome TW-10 6-Axis Twin Turret CNC Lathe
Nakamura-Tome TW-10 6-Axis Twin Turret CNC Lathe with Fanuc 16 TT-A CNC Control System, Maximum Spindle Speed 5500rpm (Main and Sub Spindle) Driven Tool Speed Maximum 3600rpm, Axis Travels X1=135mm Z1=205mm Z2=135mm Z2=625mm C1=360 degrees (0.001) C2=360 Degrees (0.001) Twin 12 Station Turrets (all positions driven) Main Spindle Crawford CDC42 Collet Chuck, Sub Spindle Kitagawa B206 3 Jaw chuck, Spindle Bore 42mm, Tool Presetter for both Turrets, Parts Catcher, Swarf Conveyor, Hydrafeed ML1 Barfeed. S/No. W102208
Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 104: Tos SUS-63 x 6500mm Centre Lathe
Tos SUS-63 x 6500mm Centre Lathe with Anilam Wizard 211 DRO, Swing Over Bed 655mm, Swing Over Cross Slide 390mm, Spindle Speeds 9 – 1120rpm, Spindle Bore 82mm, Tailstock, 400mm 3-Jaw Chuck (Fitted), 670mm 4-Jaw Chuck, (2) x Fixed 3-Point Steadies, Max Workpiece Weight 6,000kgs x 9rpm, Machine Length (approx.) 8,760mm, Machine Weight (approx.), 8,200kgs. S/No. 0440626
Please Note: This lot is located in Tamworth. Unfortunately, there are no loading facilites available on-site, dismantling and loading will be at the cost of the purchaser.