2797 - Citizen Cincom and Hardinge Conquest CNC Lathes, Toolroom Equipment and Ancillaries no longer required by Hypro EU Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Cambridge. Unfortunately, there are no loading facilites on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the
Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 64
Lot 1: Citizen M32 III MOL2034/1975 Twin Sliding Head CNC Lathe
Citizen M32 III MOL2034/1975 Twin Sliding Head CNC Lathe. S/No. P16488 (2008) with Iemca Mini Boss 332r-e Long Magazine Bar Feed, Y1, C1, X2, Z2, Cool Blast CB510 High Pressure Coolant, LNS Turbo Swarf Conveyor, Swarf Bin, Absolent ODF-1000S Filter System. S/No. 20081275, Twin Spindle, Live Tooling, Collets, Tool Holders, Angle Tool Holders, Tool Cabinets, Manuals
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 1A: 9 Drawer and 1 Door Mobile Cabinet
9 Drawer and 1 Door Mobile Cabinet with Carbide Tip Holders, Feed Fingers, Collets and Hand Tools
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 2: Citizen Cincom L5-20 Twin Sliding Head CNC Lathe
Citizen Cincom L5-20 Twin Sliding Head CNC Lathe. S/No. E-3660 (2000) with Iemca Mini Boss 325r Long Magazine Bar Feed. S/No. 0200015N05 (2000), X1, Z1, Y1, X2, Z2, Twin Spindle, Cool Blaster CB510 High Pressure Coolant, LNS Turbo HB Swarf Conveyor, Swarf Bin, Collets, Filtermist, Tool Holders, Tooling, Tool Holders, Manuals
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 2A: 10 Drawer Cabinet with Cutters
10 Drawer Cabinet with Cutters, Drills, Taps, Collets and Feed Fingers
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 2B: Cabinet with Qty of Citizen Spares and Accessories
Cabinet with Qty of Citizen Spares and Accessories
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 3: Citizen Cincom L5-20 CNC Sliding Head Lathe
Citizen Cincom L5-20 CNC Sliding Head Lathe. S/No. E-3658 (2000) with Iemca Mini Boss 325r Long Magazine Bar Feed. S/No. 020002ZN14 (2000), X1, Z1, Y2, X2, Z2, Twin Spindle, Collets, Cool Blaster CB510 High Pressure Coolant, LNS Turbo HB Swarf Conveyor, Swarf Bin, Filtermist, Tool Holders, Tooling, Tool Cabinets, Manuals
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 4: Hardinge Conquest T42 (SG42) CNC Lathe
Hardinge Conquest T42 (SG42) CNC Lathe with Fanuc 18-T Control. S/No. SGA-1097-B, Iemca TAL/AUTO 65/32 Long Magazine Bar Feed. S/No. 96031828 (1996), Driven Tools, Swarf Conveyor, Swarf Bin, Collet Chuck, Collets, 12-Station Turret, Parts Catcher, Tailstock, Driven Tool Holder, Tooling
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 4A: Qty of Barfeed Parts for IEMCA Barfeed
Qty of Barfeed Parts for IEMCA Barfeed
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilites on-site, dismantling and loading will be at the cost of the purchaser.
Lot 5: Hardinge Conquest T42 (SG42) CNC Lathe
Hardinge Conquest T42 (SG42) CNC Lathe with Fanuc 18-T Control. S/No. SG-764, Iemca TAL/AUTO 65/32 Long Magazine Bar Feed. S/No. 95100908 (1995), Driven Tools, Swarf Conveyor, Swarf Bin, Driven Tool Holder, Tooling, Parts Catcher, Tailstock, 12 Station Turret with Collet Chuck and Collets
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilites on-site, dismantling and loading will be at the cost of the purchaser.
Lot 5A: Rack with Qty of 20C Collets suitable for Hardinge Lathe
Rack with Qty of 20C Collets suitable for Hardinge Lathe
Please Note: This lot is located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.