2795B - Skoda Heavy Duty Lathes, Conventional Machine Tools and selection of Overhead Cranes surplus to the ongoing requirements of Howden CKD Compressors s.r.o.

En collaboration avec

Engineering

'L''enchère se termine le'

mardi 12 nov. 2019 at 03:00PM (GMT)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Each Individual Lot is subject to a different late release date, please see each lot for full information

 

 

Buyer's premium

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 21%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

14 nov. 2019 at 17:00 (GMT)

'Date limite d''apurement'

28 nov. 2019 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 121

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
12 nov. 2019 15:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
11
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 2: Tos Kurim FSQ 80 CNC Bedmill

Tos Kurim FSQ 80 CNC Bedmill with Mefi 872 Windows XP CNC Control, Table size 3m x 800mm, Tooling Cupboard. S/No. 14050 (1998)

Offers considered prior to Auction

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
14
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 3: Tos Kurim FRPD16X30 4-Head Plano Mill

Tos Kurim FRPD16X30 4-Head Plano Mill, Table size: 6m x 1.6m. S/No. 39920

Offers considered prior to Auction

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 20:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€1000
Enchères:
73
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 7: Skoda SIU 250T Heavy Duty Centre Lathe

Skoda SIU 250T Heavy Duty Centre Lathe, 11m Between Centres, 4 Way Bed, Internal Grinding Head, Milling/Drilling Head, 2500mm Dia Chuck, Steadies. S/No. 22730 (1985)

This lot is subject to a late release and will be available for collection from 31st January 2020

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
40
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 8: Skoda SUT 126 Lathe

Skoda SUT 126 Lathe NC x 6000mm, 1200mm Dia Chuck, 3 Way Bed, Power Tailstock, Steadies, Distance between Centres 6m. S/No. ob23169 (1987)

This Lot is subject to a late release and will be available for collection from 31st January 2020

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
27
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 9: OTA 450 AC-1860 Challenger Lathe

OTA 450 AC-1860 Challenger Lathe with Fagor Control, Duplimatic Turret, 6’’ Chuck, Manual Gear Change, 200mm 4-Jaw Chuck, 8 Station Turret. S/No. A10208A13 (2008)

This lot is subject to a late release and will be available for collection from 30th November 2019

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
14
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 10: Nagel Vertical Hone

Nagel Vertical Hone. S/No. 3755

This lot is subject to a late release and will be available for collection from 1st March 2020

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 15:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
12
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 11: TOS BHU 40/2000 Universal Grinder

TOS BHU 40/2000 Universal Grinder, Distance Between Centres 2m. S/No. 0237499

This lot is subject to a late release and will be available for collection from 30th November 2019

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€100
Enchères:
16
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 12: TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder

TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder, Magnetic Chuck 2m x 410mm. S/No. 168160201

This lot is subject to a late release and will be available for collection from 30th November 2019

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
14
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 13: TOS Type SU90A Lathe

TOS Type SU90A Lathe, 920mm 4-Jaw Chuck, 3.3m Distance Between Centres. S/No. 0419173

This lot is subject to a late release and will be available for collection from 1st March 2020

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
12 nov. 2019 17:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
19
'Prime d''acheteur:'
18%
Taux de TVA:
21%

Lot 14: Holroyd Model 5A Pump Rotor Milling Machine

Holroyd Model 5A Pump Rotor Milling Machine

This lot is subject to a late release and will be available for collection from 30th November 2019

Please Note: The high bid on this lot is subject to final acceptance and release by Howden CKD Compressors s.r.o. Please contact the auctioneer for further information.

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories