2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Lots are located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 61
Lot 1: Brother TC-32 BNQT CNC Machining Centre
Brother TC-32 BNQT CNC Machining Centre with Brother B00 CNC Control, X = 550mm Y = 400mm Z = 415mm (2) 420mm x 600mm Tables, Renishaw Tool Probe to each Table, DTS10 4th & 5th Axis Unit to one Table, 40-Station HSK40 Tool Changer, 16,000rpm Spindle, Through Spindle Coolant, Spindle Probe, DMF Extraction Unit. S/No. 121301 (2008)
Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: HSK A40 Tooling for Brother TC-32BN
HSK A40 Tooling for Brother TC-32BN Back Ends Only
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1B: HSK A40 Tooling for Brother TC-32BN
HSK A40 Tooling for Brother TC-32BN Back Ends Only
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 1, 1A & 1B
Combination of lots 1, 1A & 1B
Brother TC-32 BNQT CNC Machining Centre with Brother B00 CNC Control, X = 550mm Y = 400mm Z = 415mm (2) 420mm x 600mm Tables, Renishaw Tool Probe to each Table, DTS10 4th & 5th Axis Unit to one Table, 40-Station HSK40 Tool Changer, 16,000rpm Spindle, Through Spindle Coolant, Spindle Probe, DMF Extraction Unit. S/No. 121301 (2008)
Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale
and
HSK A40 Tooling for Brother TC-32BN Back Ends Only
and
HSK A40 Tooling for Brother TC-32BN Back Ends Only
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 1 | Brother TC-32 BNQT CNC Machining Centre |
| 1A | HSK A40 Tooling for Brother TC-32BN |
| 1B | HSK A40 Tooling for Brother TC-32BN |
Lot 2: Brother TC-S2C CNC Drill Tapping Centre
Brother TC-S2C CNC Drill Tapping Centre with Brother CVC B00 CNC Control, X = 500mm Y = 400mm Z = 300mm 600mm x 320mm Table Nikken 4th Axis Unit with Tailstock 10-Station Toolchanger BT30, 10,000rpm Spindle. S/No. 112722 (2007)
Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: BT30 Tooling for Brother TC-S2C
BT30 Tooling for Brother TC-S2C
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lot 2 & 2A
Combination of lot 2 & 2A
Brother TC-S2C CNC Drill Tapping Centre with Brother CVC B00 CNC Control, X = 500mm Y = 400mm Z = 300mm 600mm x 320mm Table Nikken 4th Axis Unit with Tailstock 10-Station Toolchanger BT30, 10,000rpm Spindle. S/No. 112722 (2007)
Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.
and
BT30 Tooling for Brother TC-S2C
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | Brother TC-S2C CNC Drill Tapping Centre |
| 2A | BT30 Tooling for Brother TC-S2C |
Lot 3: Brother TC-S2B CNC Drill Tapping Centre
Brother TC-S2B CNC Drill Tapping Centre with Brother A00 CNC Control, X = 500mm Y = 400mm Z = 300mm, 600mm x 300mm Table, 21 Station BT30 Toolchanger, 10,000rpm Spindle, Through Spindle Coolant. S/No. 111310 (2003)
Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 4: Sodick AQ327L Premium Wire EDM
Sodick AQ327L Premium Wire EDM with Sodick LP 33W CNC Premium Control, A.W.F, 650mm x 850mm Tank Size, Taper Cutting (U & V Axis) X = 750mm Y = 500mm Z = 400mm, Linear Motors (XYU Axis), Linear Glass Scale (XYU Axis). S/No. 1190 (2007)
Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 4A: 3R Tooling System
3R Tooling System
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.