2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns

Engineering

'L''enchère se termine le'

mercredi 14 nov. 2018 at 03:00PM (GMT)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Location: These Lots are located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. 

Buyer's premium

'La prime d''acheteur sera fixée à 16%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

16 nov. 2018 at 17:00 (GMT)

'Date limite d''apurement'

29 nov. 2018 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 61

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
14 nov. 2018 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
38
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 1: Brother TC-32 BNQT CNC Machining Centre

Brother TC-32 BNQT CNC Machining Centre with Brother B00 CNC Control, X = 550mm Y = 400mm Z = 415mm (2) 420mm x 600mm Tables, Renishaw Tool Probe to each Table, DTS10 4th & 5th Axis Unit to one Table, 40-Station HSK40 Tool Changer, 16,000rpm Spindle, Through Spindle Coolant, Spindle Probe, DMF Extraction Unit. S/No. 121301 (2008)

Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A & 1B

Preview image
Fin:
14 nov. 2018 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
3
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 1A: HSK A40 Tooling for Brother TC-32BN

HSK A40 Tooling for Brother TC-32BN Back Ends Only

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A & 1B

Preview image
Fin:
14 nov. 2018 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
3
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 1B: HSK A40 Tooling for Brother TC-32BN

HSK A40 Tooling for Brother TC-32BN Back Ends Only

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A & 1B

Preview image
Fin:
14 nov. 2018 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
38
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot *: Combination of lots 1, 1A & 1B

Combination of lots 1, 1A & 1B

Brother TC-32 BNQT CNC Machining Centre with Brother B00 CNC Control, X = 550mm Y = 400mm Z = 415mm (2) 420mm x 600mm Tables, Renishaw Tool Probe to each Table, DTS10 4th & 5th Axis Unit to one Table, 40-Station HSK40 Tool Changer, 16,000rpm Spindle, Through Spindle Coolant, Spindle Probe, DMF Extraction Unit. S/No. 121301 (2008)

Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale

and

HSK A40 Tooling for Brother TC-32BN Back Ends Only

and

HSK A40 Tooling for Brother TC-32BN Back Ends Only

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
14 nov. 2018 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
22
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 2: Brother TC-S2C CNC Drill Tapping Centre

Brother TC-S2C CNC Drill Tapping Centre with Brother CVC B00 CNC Control, X = 500mm Y = 400mm Z = 300mm 600mm x 320mm Table Nikken 4th Axis Unit with Tailstock 10-Station Toolchanger BT30, 10,000rpm Spindle. S/No. 112722 (2007)

Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lot 2 & 2A

Preview image
Fin:
14 nov. 2018 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£5
Enchères:
5
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 2A: BT30 Tooling for Brother TC-S2C

BT30 Tooling for Brother TC-S2C

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lot 2 & 2A

Preview image
Fin:
14 nov. 2018 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
39
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot *: Combination of lot 2 & 2A

Combination of lot 2 & 2A

Brother TC-S2C CNC Drill Tapping Centre with Brother CVC B00 CNC Control, X = 500mm Y = 400mm Z = 300mm 600mm x 320mm Table Nikken 4th Axis Unit with Tailstock 10-Station Toolchanger BT30, 10,000rpm Spindle. S/No. 112722 (2007)

 Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.

and

BT30 Tooling for Brother TC-S2C

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Lots de cette offre combinée

N° de lot Description
Preview image
Fin:
14 nov. 2018 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
35
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 3: Brother TC-S2B CNC Drill Tapping Centre

Brother TC-S2B CNC Drill Tapping Centre with Brother A00 CNC Control, X = 500mm Y = 400mm Z = 300mm, 600mm x 300mm Table, 21 Station BT30 Toolchanger, 10,000rpm Spindle, Through Spindle Coolant. S/No. 111310 (2003)

Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
14 nov. 2018 16:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
17
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 4: Sodick AQ327L Premium Wire EDM

Sodick AQ327L Premium Wire EDM with Sodick LP 33W CNC Premium Control, A.W.F, 650mm x 850mm Tank Size, Taper Cutting (U & V Axis) X = 750mm Y = 500mm Z = 400mm, Linear Motors (XYU Axis), Linear Glass Scale (XYU Axis). S/No. 1190 (2007)

Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 4 & 4A

Preview image
Fin:
14 nov. 2018 16:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
8
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 4A: 3R Tooling System

3R Tooling System

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 4 & 4A

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories