2711 - Takisawa & Nakamura-Tome CNC Lathes
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-9 de 9
Lot 1: Takisawa TW-46 2-Axis CNC Lathe
Takisawa TW-46 2-Axis CNC Lathe with Fanuc 21i-TB CNC Control System, Axis travels X=250mm Z=980mm, Maximum Spindle speed 25-2500rpm, Distance between Centers 980mm, Maximum Swing Over Bed 700mm diameter, 10 Station Turret, 18" 3 Jaw Chuck, Tool Presetter, Tailstock Quill travel 120mm, Quill diameter 90mm, MT N0.5 Taper, Spindle Bore 77mm, Swarf Conveyor. S/No. CI06C40158 (2008)
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 2: Nakamura-Tome TW-10 6-Axis Twin Turret CNC Lathe
Nakamura-Tome TW-10 6-Axis Twin Turret CNC Lathe with Fanuc 16 TT-A CNC Control System, Maximum Spindle speed 5500rpm (Main and sub spindle) Driven Tool speed maximum 3600rpm, Axis travels X1=135mm Z1=205mm Z2=135mm Z2=625mm C1=360 degrees (0.001) C2=360 degrees (0.001) Twin 12 Station Turrets (all positions driven) Main Spindle Crawford CDC42 Collet Chuck, Sub spindle Kitagawa B206 3 Jaw chuck, Spindle Bore 42mm, Tool Presetter for both Turrets, Parts catcher, Swarf Conveyor, Hydrafeed ML1 Barfeed. S/No W102208
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 3: (1 ) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
(1) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 4: (1) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
(1) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 5: (1) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
(1) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 6: (1) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
(1) x Driven and (1) x Z Driven Tool Holder to suit Nakamura Tome TW10
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 7: (2) x Z Driven Tool Holders to suit Nakamura Tome TW10
(2) x Z Driven Tool Holders to suit Nakamura Tome TW10
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 8: (11) x Static Tool Holders to suit Nakamura Tome TW10
(11) x Static Tool Holders to suit Nakamura Tome TW10
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lot 9: (10) x Static Tool Holders to suit Nakamura Tome TW10
(10) x Static Tool Holders to suit Nakamura Tome TW10
Please Note: This Lot is located at Gloucester and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.