2648 - CNC Lathes, Machining Centres, Borers and other Toolroom Equipment no longer required by Techservices (North East)
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: This lot is located in Gateshead, Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available with the auctioneer by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange an appointment.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 41
Przedmiot 1: Haas SL-40THE CNC Lathe
Haas SL-40THE CNC Lathe with Haas Control, 10 Station Tool Changer, VDI 40 Tooling, Tail Stock, 15” 3-Jaw Chuck. S/No. 3078375 (08/07)
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 2: Haas VF-2DCE Machining Centre
Haas VF-2DCE Machining Centre with Haas Control, Table size 3ft x 14”, 20 Station Tool Changer, BT 40 Tooling, Chip Screw, 6” Vice. S/No. 1062304 (10/07)
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 3: Webster Bennett Type ‘R’ 72” Elevating Rail Vertical Borer
Webster Bennett Type ‘R’ 72” Elevating Rail Vertical Borer, Maximum Swing 84”, Chuck Diameter 72”, Speeds 5.2 to 117 rpm, Mimic Dynatrace Copying, Two sets of Jaws and Boring Bars S/No. 7142-4 (1982)
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 4: Veb STSR400 Slotter
Veb STSR400 Slotter, Table size 32”. S/No. 4120.11.59
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser
Przedmiot 5: Ormerod Slotter
Ormerod Slotter, Table size 20” 8” Stoke
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 6: Bridgeport Turret Mill
Bridgeport Turret Mill, Newhall Dro, Table size 42” x 9”. S/No. 1596/BRJ/MILL
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 7: Jones and Shipman 311 Tool and Cutter Grinder
Jones and Shipman 311 Tool and Cutter Grinder. S/No. 64213
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 8: Edgwick Surface Grinder
Edgwick Surface Grinder 18” x 6” Magnetic Chuck
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 9: Colchester Triumph 2000 Lathe
Colchester Triumph 2000 Lathe, distance between Centres 1300mm, 250mm 3-Jaw Chuck, Gap Bed, 300mm Swing, 300mm 4-Jaw Chuck, 2-point Steady, 3-point Steady. S/No. 6/0004/10797X
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Przedmiot 10: Clarkson Tools and Cutter Grinder
Clarkson Tools and Cutter Grinder. S/No. 1304
Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.