IMA Wehrmann Type Combima Double Sided Edge Banding Machine. S/No. RB27223. (1998)

Micromat Controls, Min width circa 240mm, Overall Machine Length 8.2 m, Max width circa 2515 mm

Believed to contain:

Pre-Milling Blocks 2 Left, 2 Right

(2) Hot Melt Glue Systems

(2) Front and (2) Back End Trimmers

(2) Top and (2) Bottom Trimmers

(2) Grooving Units

Top and Bottom Scrape

Twin Sanding

Please Note: This Item is located in Leeds

IMA Wehrmann Type AVM/K/541/S5R3 Single Sided Edge Banding Machine. S/No. RB28250 (01-1998)

Micromat Control Min width circa 175mm Max width circa 667mm

Believed to contain:

(2) Milling Blocks

Hot Melt Glue System

Front and Rear End Trimming

Fine Trimming

Grooving

Scraper

Buffing

Please Note: This Item is located in Leeds

Brandt Type KTD 51 Edge Banding Machine, Table size 800mm x 600mm. S/No. 0260035888 (1995)

Please Note: This Item is located in Leeds

Rye MA 1500 CNC Router with Fagor 8020 Control, Twin Spindles with Side Drilling Heads, X = 1500mm, Y = 1000mm, Z = 180mm. S/No. 137 90

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser.

Sparks Semi Automatic (Non Ferrous) Double Mitre Saw, Max. Cut Length at 90degrees – 3m, 300mm Blade Diameter, Pneumatic Clamping (2005)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

FOM Blitz Semi Automatic (NonFerrous) Double Mitre Saw, Max. Cut Length at 90degrees 4m, Cutting Capacity at 90degrees 280mm x 90mm, 450mm Blade Diameter, Pneumatic Clamping

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Interwood Router. 49’’ x 36’’ Table. S/No. R026D50948

Please Note: This Item is located in Leeds

Jet Model J0VS-10 Oscillating Spindle Sanding Machine with Tilting Table, Single Phase. S/No. 3050099

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser.

De-Walt DW709 Chop Saw with Trend T3A Extractor, Single Phase

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser.

Charnwood W792 Twin Bag Dust Extractor, 2.25kw, Single Phase. S/No. 295755 (1997)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser.