3294 - Doosan Puma Alloy Wheel Lathes & Large Selection of Doosan DNM 6700/650II/400 Machining Centres (2013 – 2016)

Engineering

L'enchère s'est terminée le

2024-04-11 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Birmingham and Wolverhampton, UK. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2024-04-15 17:00:00.0

'Date limite d''apurement'

2024-04-25 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 20

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
11 avr. 2024 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 1: Doosan Puma VAW 800 Twin Turret Vertical Alloy Wheel Turning Centre

Doosan Puma VAW 800 Twin Turret Vertical Alloy Wheel Turning Centre with Fanuc Series 31i Model A CNC Control, Travels X Axis 570mm, Z Axis 650mm, Max Turning Diameter 711mm, Max Turning Length 440mm, Max Turning Wheel Size 28", 2 x 6 Position Tool Turrets, Spindle Speed Max 4500rpm, Samchully HC-21 Powered 3 Jaw Chuck, LNS Swarf Conveyor and Coolant System, Approx Run Time 11568 Hours, Machine Weight 13500kg. S/No. MT0003-000163 (2016) Country of Origin: Korea

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 1 & 1A

Preview image
Fin:
11 avr. 2024 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 1A: Filtermist FX6002 Oil Mist Extractor

Filtermist FX6002 Oil Mist Extractor

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 1 & 1A

Preview image
Fin:
11 avr. 2024 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot *: Combination of lots 1 & 1A

Combination of lots 1 & 1A

Lot 1 - Doosan Puma VAW 800 Twin Turret Vertical Alloy Wheel Turning Centre with Fanuc Series 31i Model A CNC Control, Travels X Axis 570mm, Z Axis 650mm, Max Turning Diameter 711mm, Max Turning Length 440mm, Max Turning Wheel Size 28", 2 x 6 Position Tool Turrets, Spindle Speed Max 4500rpm, Samchully HC-21 Powered 3 Jaw Chuck, LNS Swarf Conveyor and Coolant System, Approx Run Time 11568 Hours, Machine Weight 13500kg. S/No. MT0003-000163 (2016). Country of Origin: Korea

Lot 1A - Filtermist FX6002 Oil Mist Extractor

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

N° de lot Description
Preview image
Fin:
11 avr. 2024 18:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 2: Doosan Puma AW560MF CNC Alloy Wheel Turning Centre

Doosan Puma AW560MF CNC Alloy Wheel Turning Centre with Fanuc Series 31i Model B CNC Control, Max Turning Diameter 550mm, X Axis Travel 362mm, Z Axis Travel 720mm, Renishaw Probing, 12 Tool Turret Carousel, LNS MH500 Swarf Conveyor. S/No. ML 0208 - 000822 (2015) Country of Origin: Korea

Please Note: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 2 & 2A

Preview image
Fin:
11 avr. 2024 18:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 2A: Filtermist FX6002 Oil Mist Filter Extractor

Filtermist FX6002 Oil Mist Filter Extractor

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 2 & 2A

Preview image
Fin:
11 avr. 2024 18:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot *: Combination of lots 2 & 2A

Combination of lots 2 & 2A

Lot 2 - Doosan Puma AW560MF CNC Alloy Wheel Turning Centre with Fanuc Series 31i Model B CNC Control, Max Turning Diameter 550mm, X Axis Travel 362mm, Z Axis Travel 720mm, Renishaw Probing, 12 Tool Turret Carousel, LNS MH500 Swarf Conveyor. S/No. ML 0208 - 000822 (2015). Country of Origin: Korea

Lot 2A - Filtermist FX6002 Oil Mist Filter Extractor

Please Note: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

N° de lot Description
Preview image
Fin:
11 avr. 2024 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 3: Doosan DNM 6700 Vertical Machining Centre

Doosan DNM 6700 Vertical Machining Centre with Fanuc I Series 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx. Run Time 21937 Hours, Max Spindle Speed 15,000rpm. S/No. MV0092-000238 (2016). Country of Origin: Korea

Please Note: Right hand screw conveyor fault.

Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the ...

Preview image
Fin:
11 avr. 2024 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 4: Doosan DNM 6700 Vertical Machinery Centre

Doosan DNM 6700 Vertical Machinery Centre with Fanuc I Series CNC Control, Table Size 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System. S/No. MV0032-000234 (2016). Country of Origin: Korea

Please Note: Left and Right hand screw conveyor fault.

Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which ...

Preview image
Fin:
11 avr. 2024 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 5: Doosan DNM 6700 Vertical Machinery Centre

Doosan DNM 6700 Vertical Machinery Centre with Fanuc I Series CNC Control, Table Size 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx. run time 21339 hours, Max Spindle Speed 12,000rpm. S/No. MV0092-000232 (2016). Country of Origin: Korea

Please Note: Left and Right hand screw conveyor fault.

Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added ...

Preview image
Fin:
11 avr. 2024 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 6: Doosan DNM 6700 Vertical Machining Centre

Doosan DNM 6700 Vertical Machining Centre with Fanuc I Series CNC Control, Table Size 1500mm x 670mm, 30 Tool ATC, 40 Spindle Taper, LNS Swarf Conveyor and Coolant System, Approx. run time 25715 hours, Max Spindle Speed 12,000rpm. S/No. MV 0092-000177 (2016). Country of Origin: Korea

Please Note: Right hand screw conveyor fault.

Please Note: This lot is located in Wolverhampton, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 6 & 6A

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories