3030 - Akira Seiki and Fagima Machining Centres, Takisawa, Daewoo, Comev Picodue and Poreba Lathes and Ancillary Factory Items
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 81-90 de 191
Lot 88: (5) x Bays of Adjustable Racking
(5) x Bays of Adjustable Racking, (12) x 2500mm Uprights, 60 x 2250mm Beams (Contents not Included). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 90: Nardini Sagaz SZ325AT Lathe with Giotto 3X D.R.O
Nardini Sagaz SZ325AT Lathe with Giotto 3X D.R.O, 3-Position Turret, 650mm 3-Jaw Self-Centering Chuck, Centre Height: 325mm, Distance between Centres: 2,000mm. Country of Origin: Brazil
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 91: Thomas M210 Manual Column Sawing Machine
Thomas M210 Manual Column Sawing Machine. S/No. 210/264. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 92: Serrmac RAG 25L Column Drill
Serrmac RAG 25L Pillar Drill with Clamp & Adjustable Table. S/No. 924026. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 93: OMCA 650A Bevelling Machine
OMCA 650A Bevelling Machine. S/No. 3206 (2015). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 94: Femi Belt Grinder
Femi Belt Grinder, Belt Width: 120mm, Length: 1,400mm. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 95: Centre Lathe with 3-Position Manual Turret
Centre Lathe with 3-Position Manual Turret, 250mm 3-Jaw Self-Centering Chuck, Centre Height: 220mm, Distance between Centres: 600mm. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 96: Serrmac Rag 25L Column Drill
Serrmac RAG 25L Pillar Drill with Clamp & Adjustable Table. S/No. 041961 (2004). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 96A: Vice
Vice. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 97: Serrmac RAG 20/22 Pillar Drill
Serrmac RAG 20/22 Pillar Drill with Clamp and Adjustable Table. S/No. 022571 (2002). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.