THIS ITEM HAS BEEN SOLD

Titan/Valmet SR6 Slitter/Rewinder. S/No. 99T046 (2000), Web Width 1600mm, Shaftless Unwind, Splice Table, Slitting Station, Driven Nip/Pull Roll, Rewind Dia 610mm

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

THIS ITEM HAS BEEN SOLD

Gunter 826-G30 Two Station Pouch Punching Unit. S/No. 1877 (2013) with Parker Hiross Water Chiller, Spare Idle Roller

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

THIS ITEM HAS BEEN SOLD

* Combination of Lots 7 & 7A

Lot 7 - Titan/Valmet SR6 Slitter/Rewinder. S/No. 99T046 (2000), Web Width 1600mm, Shaftless Unwind, Splice Table, Slitting Station, Driven Nip/Pull Roll, Rewind Dia 610mm

Lot 7A - Gunter 826-G30 Two Station Pouch Punching Unit. S/No. 1877 (2013) with Parker Hiross Water Chiller, Spare Idle Roller

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Boge SF100-3 Variable Speed Air Compressor (2013)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described..

Hi-Line Tundra 500 Refrigerant Air Dryer. S/No. 33-12-MA11223 (2012) with Sterling Oil/Water Seperator, (2) x Filters, OKS 1000 litre Vertical Air Receiver (2008)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Boge Airtelligence Provis 2.0 Compressor Control System (2017)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

THIS ITEM HAS BEEN SOLD

Braby Aluminium Alloy Material Silo (1996) 3.5m dia x Tan Length 9.77m, Design Bulk Density 600 kg/m3, Silo Gross Volume 100m3, Height 12m, Load Cells

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

THIS ITEM HAS BEEN SOLD

Braby Aluminium Alloy Material Silo (1996) 3.5m dia x Tan Length 9.77m, Design Bulk Density 600 kg/m3, Silo Gross Volume 100m3, Height 12m, Load Cells

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

THIS ITEM HAS BEEN SOLD

Braby Aluminium Alloy Material Silo (1993) 3.5m dia x Tan Length 9.77m, Design Bulk Density 540 kg/m3, Silo Gross Volume 100m3, Height 12m, Load Cells

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

THIS ITEM HAS BEEN SOLD

Braby Aluminium Alloy Material Silo (1995) 3.5m dia x Tan Length 9.77m, Design Bulk Density 600 kg/m3, Silo Gross Volume 100m3, Height 12m, Load Cells

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.