2872 - Bridgeport, Doosan, Hitachi Seiki, XYZ, Mazak Machining Centres and Lathes, Spark Eroders, Drills and Ancilliary Items no longer required
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham, Tamworth, Wolverhampton & Oakham. Please see individual lots for loading information and charges.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 73
Lot 1: Bridgeport Vertical Machining Centre 2000
Bridgeport Vertical Machining Centre 2000 – 30 XP2 with Heidenhain i TNC 530 Control, 30 Station ATC, Table Size 2300mm x 660mm. S/No. 950767 (2004)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £1,000 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: Doosan DNM 400 II Machining Centre
Doosan DNM 400 II Machining Centre, Table Size 920mm x 430mm, Fanuc I Series Control, 30 Station ATC, Swarf Conveyor. S/No. MB0009-002744 (2014)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £750 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 3: Doosan Puma V550M CNC Vertical Turning Lathe
Doosan Puma V550M CNC Vertical Turning Lathe with Fanuc 21i-TB Control, C-Axis, Driven Tools, 18” 3-Jaw Chuck, Swarf Conveyor, Coolant Tank. S/No. 3V150201 (2004)
Please Note: This lot is located in Oakham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 3A: Miyano BND42S5 Twin Spindle CNC Turning Centre
Miyano BND42S5 Twin Spindle CNC Turning Centre with Miyano Fanuc 21 Control, Collet and Chuck, Parts Catcher, Take off Conveyor, 12 Station Turret, Swarf Conveyor, Mobile Swarf Bin. S/No. BD60521S (2000) IEMCA VIP 70 Barfeed. S/No. 0200106Q09 (2001)
Please Note: This lot is located in Wolverhampton, West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: Hitachi Seiki HS500 Twin Pallet Horizontal Machining Centre
Hitachi Seiki HS500 Twin Pallet Horizontal Machining Centre with Seicos (Fanuc) 10M Control, CAT40, 12,000rpm Spindle, 1 Degree Indexing ‘B’ Axis, 60 Station ATC, Swarf Conveyor. S/No. HS50014 (1998) (No Probing)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: XYZ 1020 Vertical Machining Centre
XYZ 1020 Vertical Machining Centre with Siemens Sinumerik Control, Table size 1120mm x 500mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMU00023 (2010 verified by XYZ)
Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £960 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 5A: 4th Axis Unit, 270mm 3 Jaw Chuck & Tailstock
4th Axis Unit, 270mm 3 Jaw Chuck & Tailstock
Please Note: This lot is located in Birmingham, this item will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 5 & 5A
Combination of Lots 5 & 5A
Lot 5 XYZ 1020 Vertical Machining Centre with Siemens Sinumerik Control, Table size 1120mm x 500mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMU00023 (2010 verified by XYZ)
Lot 5A - 4th Axis Unit, 270mm 3 Jaw Chuck, Tailstock,
Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £960 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 5 | XYZ 1020 Vertical Machining Centre |
| 5A | 4th Axis Unit, 270mm 3 Jaw Chuck & Tailstock |
Lot 6: XYZ 560 Vertical Machining Centre
XYZ KR MF560 Vertical Machining Centre with Sinumerik Control, Table Size 610mm x 370mm, 12 Station Tool Changer, BT40 Back End Tooling. S/No. MF247 (2006)
Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Lot 7: XYZ Vulcan 250 TC MX-1B Lathe
XYZ Vulcan 250 TC MX-1B Lathe with Siemens Sinumerik 828D Control, 12 Station Turret, 250mm 3 Jaw Chuck, Tooleye, Swarf Conveyor, Tailstock, VDI 40 Tooling, (2) x Back End Live Tooling and Centre, Parts Catcher, Sets of Jaws. S/No. 0505069 (2005 verified by XYZ). Multi-feed MX-1B Barfeed. S/No. 5091
Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.