2823A - Hurco and Bridgeport Machining Centres, Bridgeport CNC Mills, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Worcester
Engineering
La subasta finalizó el
Tiempo restante
Descripción de la subasta
Location: These lots are located in Cannock and Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Prima del comprador
A los compradores Premium se les cobrará un 16.00%.
IVA
El IVA ascenderá a un 20.00%.
Vista de horas
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Tenga en cuenta: - Cualquier traducción mediante Google Translate no está garantizada como una traducción precisa y es solo para fines de guía. La descripción del lote en inglés es la descripción predominante y se le da el mejor conocimiento del subastador. Sin embargo, la precisión no está garantizada y el comprador debe verificarla antes de hacer una oferta.
Aviso a compradores
Fecha final de pago
Fecha final de expedición
Transportistas
Empresas de almacenamiento
Exportar / Importar desde el Reino Unido detalles
Lotes 1-10 de 92
Lote 100: Hurco VMX 30 Vertical Machining Centre
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote 100A: Qty of CAT40 Tool Holders
Qty of CAT40 Tool Holders and Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote *: Combination of Lots 100 & 100A
Combination of Lots 100 & 100A
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
and
Qty of CAT40 Tool Holders, Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí| N° de lote | Descripción |
|---|---|
| 100 | Hurco VMX 30 Vertical Machining Centre |
| 100A | Qty of CAT40 Tool Holders |
Lote 101: Hurco VSX24 Vertical Machining Centre
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote 101A: Qty of CAT40 Tool Holders and Collets
Qty of CAT40 Tool Holders and Collets
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote *: Combination of Lots 101 & 101A
Combination of Lots 101 & 101A
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
and
Qty of CAT40 Tool Holders and Collets
Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí| N° de lote | Descripción |
|---|---|
| 101 | Hurco VSX24 Vertical Machining Centre |
| 101A | Qty of CAT40 Tool Holders and Collets |
Lote 200: Hurco VM1 Machining Centre
Hurco VM1 Machining Centre with Hurco Max Control, 16 ATC, Table Size 760mm x 350mm, 6” Machine Vice, Qty of BT 40 Tooling. S/No. H-V11662 (2006)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lote 201: Bridgeport VMC 800/22 Digital Machining Centre
Bridgeport VMC 800/22 Digital Machining Centre with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote 201A: Qty of BT40 Tool Holders & Collets
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote *: Combination of Lots 201 & 201A
Combination of Lots 201 & 201A
Bridgeport VMC 800/22 Digital Machining Centre, with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
and
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí| N° de lote | Descripción |
|---|---|
| 201 | Bridgeport VMC 800/22 Digital Machining Centre |
| 201A | Qty of BT40 Tool Holders & Collets |