2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock

Engineering

La subasta se cierra el

miércoles 16 oct 2019 at 04:00PM (BST)
Añadir a calendario

Tiempo restante

Pujas de plazo extendido

Descripción de la subasta

Location: These lots are located in Cannock.  Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lot 107A however is located in Birmingham.

Buyer's premium

A los compradores Premium se les cobrará un 16%.

IVA

El IVA ascenderá a un 20%.

Vista de horas

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Marque esta casilla y pulse confirmar


* Atención:- No se garantiza la corrección de las traducciones realizadas con Google Translate, que se proporcionan solo a modo de orientación. Será la descripción en inglés de los lotes, que reflejará el leal saber y entender de los subastadores, la que prevalezca. Con todo, no se garantiza la exactitud de la misma, que deberá comprobar el comprador antes de la puja.

Aviso a compradores

Fecha final de pago

18 oct 2019 at 18:00 (BST)

Fecha final de expedición

31 oct 2019 at 17:00 (GMT)

Transportistas

Empresas de almacenamiento

Lotes 1-10 de 81

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Finalización:
30 oct 2019 15:00:00 GMT
Tiempo restante:
Puja cerrada
Incremento:
£250
Pujas:
4
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 100: Hurco VMX 30 Vertical Machining Centre

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Este lote también se ofrece como lote combinado

*: Combination of Lots 100 & 100A

Preview image
Finalización:
30 oct 2019 15:00:00 GMT
Tiempo restante:
Puja cerrada
Incremento:
£25
Pujas:
2
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 100A: Qty of CAT40 Tool Holders

Qty of CAT40 Tool Holders and Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Este lote también se ofrece como lote combinado

*: Combination of Lots 100 & 100A

Preview image
Finalización:
30 oct 2019 15:00:00 GMT
Tiempo restante:
Puja cerrada
Incremento:
£250
Pujas:
15
Compradores Premium:
16%
Tasa de IVA:
20%

Lote *: Combination of Lots 100 & 100A

Combination of Lots 100 & 100A

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

and

Qty of CAT40 Tool Holders, Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lotes en esta combinación

N° de lote Descripción
Preview image
Finalización:
30 oct 2019 15:00:00 GMT
Tiempo restante:
Puja cerrada
Incremento:
£250
Pujas:
9
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 101: Hurco VSX24 Vertical Machining Centre

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Este lote también se ofrece como lote combinado

*: Combination of Lots 101 & 101A

Preview image
Finalización:
30 oct 2019 15:00:00 GMT
Tiempo restante:
Puja cerrada
Incremento:
£25
Pujas:
2
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 101A: Qty of CAT40 Tool Holders and Collets

Qty of CAT40 Tool Holders and Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Este lote también se ofrece como lote combinado

*: Combination of Lots 101 & 101A

Preview image
Finalización:
30 oct 2019 15:00:00 GMT
Tiempo restante:
Puja cerrada
Incremento:
£250
Pujas:
12
Compradores Premium:
16%
Tasa de IVA:
20%

Lote *: Combination of Lots 101 & 101A

Combination of Lots 101 & 101A

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

and

Qty of CAT40 Tool Holders and Collets

Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lotes en esta combinación

N° de lote Descripción
Preview image
Finalización:
16 oct 2019 16:30:00 BST
Tiempo restante:
Puja cerrada
Incremento:
£500
Pujas:
30
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 102: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 1625

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Finalización:
16 oct 2019 16:30:00 BST
Tiempo restante:
Puja cerrada
Incremento:
£500
Pujas:
30
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 103: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0167

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Finalización:
16 oct 2019 16:50:00 BST
Tiempo restante:
Puja cerrada
Incremento:
£500
Pujas:
20
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 104: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0168

Please Note: For Spares and Repairs

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Finalización:
16 oct 2019 17:00:00 BST
Tiempo restante:
Puja cerrada
Incremento:
£500
Pujas:
24
Compradores Premium:
16%
Tasa de IVA:
20%

Lote 105: Sodick AM3L Die Sink

Sodick AM3L Die Sink with Sodick LN1 Control, 4 Automatic Tool Changer, 3R Tooling, Table Size 600mm x 400mm. S/No. 0070 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categorías