Matsuura MC-660VG High Speed Vertical Milling Machine with Yasnac J300 CNC Control, Advanced Zee Lag Control, Table 940 x 460mm, 30 ATC, Through Spindle Coolant. S/No. 010314621 (2001)

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

40 International Spindle Tooling, Nikken Balanced Tools with Collets & 3D Edgefinder

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 1 & 1A

Matsuura MC-660VG High Speed Vertical Milling Machine with Yasnac J300 CNC Control, Advanced Zee Lag Control, Table 940 x 460mm, 30 ATC, Through Spindle Coolant. S/No. 010314621 (2001)

and

40 International Spindle Tooling, Nikken Balanced Tools with Collets & 3D Edgefinder

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Charmilles Robofil F400 Wire Cut Machine. No. 71046. M225, Part Maximum Dimensions:  X = 1200 x Y= 760 x Z = 200mm, Part Maximum Weight: 800kg, Work Tank dimension 1260 xy 800mm, Programme Loading via Dell Laptop with TU58 Tape System Emulator, Angle 0-30 degrees, Manual Wire Feed, Some Spares

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Leadwell MCV-550D CNC Milling Machine with Fanuc 10MA Control, Fanuc AC Spindle Motor Model 6, 7.5hp Continuous (10hp 30mins), Table 800mm x 400mm, Movement X - 550mm, Y - 360mm, Z- 510mm, 16 Tool ATC, BT40 Spindle Taper, 2 Speed Gearbox, Low gear 30-1000rpm, high 1000-4000rpm, Machine is Equipped with a full size 200m/m High Sub Table

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities available on-site, dismantling and Loading will be at the cost of the purchaser.

BT40 Spindle Tooling

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 3 & 3A

Leadwell MCV-550D CNC Milling Machine with Fanuc 10MA Control, Fanuc AC Spindle Motor Model 6, 7.5hp Continuous (10hp 30mins), Table 800mm x 400mm, Movement X - 550mm, Y - 360mm, Z - 510mm, 16 Tool ATC, BT40 Spindle Taper, 2 Speed Gearbox, Low Gear 30-1000rpm, High 1000-4000rpm, Machine is equipped with a full size 200m/m High Sub Table

and

BT40 Spindle Tooling

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Sharnoa HPM32 Vertical Machining Centre plus Faemat High Speed Spindle, Travel X 800mm Y 540mm Z 500mm, ATC 18 Tools, Machine Fitted with:- Heidenhain Positive Air Supply Scales, Faemat FA1 110CUS Side Mounted High Speed Spindle up to 30,000rpm, HSK50 Tooling for High Speed, Additional Faemat Spindle Chiller, Spindle, Main Spindle 5.5kw 60-8000rpm bt 40

Please Note: High Speed Spindle Functioning,Yaskawa Spindle Drive Unit Faulty

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 1302 EIU 2 Cylindrical and Internal Grinder, Maximum Swing 14” x 27" between Centres, Steadies, 3-Point and 2-Point, Mag chuck, 3 Jaw Chuck, Radius Dresser, Faceplate, Coolant, Wheel Arbours

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Jones and Shipman Model 1011 Grinder, 27" x 10" Capacity, Mag Chuck, Coolant, 5.5hp, 10" Grinding 2 Wheel, Weight 2700kgs,

Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.