2741 - CNC Lathes, Machining Centres and Toolroom Equipment no longer required due to investment in new equipment by Shannon Precision Engineering, Ireland
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Clearance from 3rd – 17th January 2019
Please Note: These lots are located in Shannon, County Clare, Ireland. Unfortunately, there are not loading facilities available, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 23.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 20
Lot 1: Okuma MA60HB Horizontal Machining Centre
Okuma MA60HB Horizontal Machining Centre with OSP U100M Control, Twin Pallet, X-Axis 800mm, Y-Axis 800mm, Z-Axis 800mm, Table 600 x 600, Renishaw MP10 Probe. S/No. 760 (2001)
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 2: Mazak VTC20B Vertical Machining Centre
Mazak VTC20B Vertical Machining Centre with Mazatrol M Plus Control (1997)
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 3: Deckel Maho 60T DMU Machining Centre
Deckel Maho 60T DMU Machining Centre with Heidenhain 426L430m Control, Table 1000mm x 600mm, ATC 20 Tools. S/No. 71.408895 11720003513 (2001)
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 4: Homma MF2/S4/BW3 TAC-12F Turning Machine
Homma MF2/S4/BW3 TAC-12F Turning Machine with Fanuc 15T Control, Chuck 1200mm Diameter, Swing 1600mm, Height 950mm, Maximum Load 6000kgs, Bottom Turret 15 Tool (Driven), X= 500mm Z= 500mm. S/No. TD5005
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 5: Swedturn ST12 CNC300 Turning Machine
Swedturn ST12 CNC300 Turning Machine with Sweden Control CNC300SMI, Chuck 500mm Diameter, Swing 550mm, Chuck to Centre 1300mm, X=500 Z=1200. S/No. 34-583106-11
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 6: Traub 500 TNA/500 Turning Machine
Traub 500 TNA/500 Turning Machine with Traub Control TX8F, Chuck 315mm Diameter, Swing 500mm, 12 Station Turret, X=550 Z=666. S/No. 146 (1995)
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 7: Traub TNA 400 Lathe
Traub TNA 400 Lathe with TX8H Traub Control System, Chuck 230mm, 12 Station Turret, Tailstock, Swarf Conveyor
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 8: Mazak V-515-40 Vertical Machining Centre
Mazak V-515-40 Vertical Machining Centre with Mazatrol M-32 Control, Twin Pallet, MC Table Size 1.3m x 550mm, 33 ATC. S/No. 110004 (1996)
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 9: Enshu DT-C 5 Axis Milling Machine
Enshu DT-C 5 Axis Milling Machine with Fanuc O- Mate MC Control, 600 x 300 Table, X=400 Y=300 Z=200, BT30 Shank Type, 1 Spindle. (1994)
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 10: Schneider Surface Grinder
Schneider Surface Grinder, Magnetic Chuck 1220mm X 460mm, Grinding wheel Diameter 350mm, Stroke 1500 x 500mm.
Please Note: This lot is located in Shannon, County Clare, Ireland. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.