Colchester Multi-Turn 2000 CNC Lathe with Fanuc OiTC Control with Manual i Guide, 400mm x 1156mm Gap Bed Capacity, 250mm 3 Jaw Chuck, 8 Station Turret, 55m Spindle Bore, 2500 RPM, 246mm Swing Over Cross Slide (2009)

Please Note: This lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Doosan S310 CNC Lathe with Fanuc 21t Control, Distance Between Centres 450mm, 12 Station Turret, Swing Over Bed 500mm, Hole Dia. 77mm, X Travel 200mm, Y Travel 450mm, Tooling and Manuals. S/No. 1139 (2001)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

XYZ Mini Turn 190 CNC Lathe with Siemens 810D Powerline, 200mm 3 Jaw Power Chuck, 500mm Between Centres, 8 Station Turret, Tool Eye, Tooling, Parts Catcher, Swarf Conveyor, Swarf Bin. S/No. CMK1576 (2007)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

XYZ 410 Proturn CNC Lathe with Prototrak LX3 Control, 3 Point Steady, 3 Jaw Chuck, Quick Change Tool Post plus Holders. S/No. 330 (1998)

Please Note: This lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

XYZ Vulcan CNC Lathe with Siemens 810D Shop Turn Control, 250mm 3 Jaw Power Chuck, 700mm Between Centres, X Travel 220mm, Y Travel 650mm, 12 Station Turret, Parts Catcher, Tool Eye, Tooling, Swarf Conveyor, Swarf Bin. S/No. 0202070 (2002)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Haas TL1 – 1CE CNC Lathe with Haas Control, 210mm 3 Jaw Chuck, Quick Change Tooling with 6 Tools, Tailstock. S/No. 70136 (5/05)

Please Note: This lot is located in Gosport, Hampshire. This lot is located within the building’s first floor and can only be removed by the appointed contractor. The charge for dismantling, internal transporting and lowering to ground level onto a suitable vehicle is £1300. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Harrison Alpha 550 CNC Gap Bed Lathe, Swing 550 mm, Distance Between Centres 1500mm, Fanuc Control, Spindle Speeds 15 – 1800 RPM, Spindle Bore 90 mm, 3 & 4 Jaw Chucks. S/No. A50083 (1997)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Cincinnati Hawk 150 CNC Lathe with Multifeed ML1 Short Magazine Bar Feed with Acramatic 2100 Control, Collet Chuck, Distance Between Centres 400 mm, X Travel 215 mm, Z Travel 440 mm, 12 Station Turret, Parts Catcher. S/No. 7051A00RA0309 (1998)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Harrison Alpha 400 CNC Teach Lathe 400mm X 1250mm Between Centres, Gap Bed, 3 Jaw Chuck, Fanuc Control, Quick Change Tool Post Plus Holders, 245mm Swing Over Cross Slide, 585mm Swing in Gap, 54mm Spindle Bore. S/No. A30131 (1996)

Please Note: This lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Hyundai HIT 15S CNC Lathe with Siemens 840C Control, 200mm Chuck Dia, 250mm Max Turning Dia, 400mm Max Turning Length, 42mm Spindle Bore, 8-Station Turret, Tool Eye, Collet Chuck. S/No. 34166035 (1995)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.