2621 - Precitech Diamond Turning Lathe, CNC Lathes, Machining Centres and Other Associated Equipment previously used in the Aerospace & Air Bearings Manufacturing Industries
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please see Individual Lots for Location and loading facilities.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 24
Lot 100: Precitech Nanoform 250 Ultra Precision Diamond Turning Lathe
Precitech Nanoform 250 Ultra Precision Diamond Turning Lathe with Precitech UPX CNC Control System, work Piece Balancing Software, Maximum Speed of Air Bearing Work Spindle 18000rpm, Fitted with 200mm Vacuum Chuck, Maximum Load on Spindle 27kg, Axis Travels X=220mm, Z=220mm, Maximum Feed Rate 4000mm/min Maximum Swing 250mm, Tool Platten Dimensions 600mm x 370mm, Granite Base Construction, Vibration Isolation System, Oil Hydrostatic Machine Slides, Spray Mist Lubrication System, Fume Extraction Unit, Vacuum Unit. S/No. 2009-023 (2011)
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 101: Matsuura Cublex 42 5 Axis Twin Pallet Turning/Milling Machine
Matsuura Cublex 42 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 20000rpm, HSK 63 Spindle Taper, Axis Travels X=520mm Y=730mm Z=510mm A=120 Degrees (-110/+10) C=360 Degrees, Rapid Feed Rates 50m/min, Maximum Table Speed for Turning 1800rpm, 120 Station ATC, Pallet Diameter 300mm, Maximum Component Size H=350mm D=420mm, 40 Bar Through Spindle Coolant, FSE Filtration System, Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Filtermist FX5000 Fume Extractor, Swarf Bin, (2) Spare Pallets (Fixtures Not Included). S/No. 18009 (3/2009)
Please Note: This Machine has had a new spindle end of 2016
Please Note: This Item is located in West Sussex
Lot 102: Matsuura Cublex 25 5 Axis Twin Pallet Turning/Milling Machine
Matsuura Cublex 25 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 15000rpm, HSK 63 Spindle Taper, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed for Turning 3000rpm, Rapid Feedrates 50m/Min 150 Station ATC, FSE Filtration System 40 Bar Through Spindle Coolant, Filtermist FX4000 Fume Extraction, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm, Renishaw Probe Interface, Tool Presetter, Swarf Conveyor, Swarf Bin, Aproximately 12 Additional Pallets. S/No. 17777 (7/2008)
Please Note: New spindle 2 years ago
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable ...
Lot 103: Studer S36 CNC External Grinder
Studer S36 External Universal CNC Grinder with Ge Fanuc 16t Control System, Maximum Permissible Wheel Speed 45m/S, Maximum Wheel Diameter 500mm, X Axis Travel 260mm, Z Axis Travel 650mm, Distance between Centres 1000mm, Centre Height 175mm, Maximum Turning Diameter 250mm with Coolant Filtration, Fume Extraction Unit. S/No. 020.0688.90.084
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 104: Jones & Shipman Dominator Grinder
Jones & Shipman Dominator 624 CNC Surface Grinder with GE Fanuc Series 210i-M CNC Control, Wheel Speeds 1000-3200rpm, Grinding Wheel Maximum Diameter 250mm x25 x 76.2mm, Table 600mm x 200mm, Maximum Grinding Length 600mm, Maximum Grinding Width 200mm, Axis Travels X=650mm Y=440mm Z=200mm C=0.0001mm, Equipped with 4th Axis, Coolant Filtration System, Filter Mist. S/No. M20583 (Installed 2002)
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 104A: Andmar BG Internal Grinder
Andmar BG Internal Grinder, Jones and Shipman 1074 Grinder Modified by Andmar to Toolmakers Specification. S/No. A1872
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 105: Alpha 1350S CNC Lathe
Harrison Alpha 1350s 2 Axis CNC Lathe with Harrison Ge Fanuc Alpha 1000 Series Control System, Touch Screen, Maximum Spindle Speed 3250rpm, Axis Travels X=230mm, Z=500mm, Rapid Feed Rates X=3m/min Z=6m/min, Distance between Centres 760mm, fitted with 160mm Pratt 3 Jaw Chuck, Manual Tailstock, 4 Position Manual Tool Post. S/No. S9D107 (2004)
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 106: Emco 342 CNC Lathe
Emco 342 CNC Lathe with Siemens Sinumerik Control System, Maximum Spindle Speed 6000rpm, Axis Travels X=300mm Z=300mm, 6” 3 Jaw Chuck, Tail Stock, 42mm Bar Capacity, 12 Station VDI Turret, Distance between Centers 300mm.
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 107: Chiron 220-88 M2000 High Speed Machining Centre
Chiron 220-88 M2000 High Speed Machining Centre with GE Fanuc Series 18i-M Control, 40 Station ATC, Table Size 2600mm x 550mm, Automatic Doors. S/No. 220-88 (2003)
Please Note: This lot is located in Birmingham and can be loaded free of charge to a suitable vehicle should the purchaser be able to supply front loaders, alternatively, loading of the machine will be at the cost of the purchaser. Blocking and securing will be at the cost of the purchaser.
Lot 108: Cincom Citizen L520 Sliding Head CNC Lathe
Cincom Citizen L520 Sliding Head CNC Lathe with Boss 3R Barfeed,
Lemca Control on Barfeed. S/No. E3945 (2004)
Please Note: This lot is located in Birmingham and will be
loaded free of charge to a suitable vehicle. Blocking and securing
will be at the cost of the purchaser.