EPTR 1320mm x 1.5mm Mild Steel Capacity Treadle Operated Guillotine with Front Support Arms, Squaring Guide on Bed, Manual Rear Back Gauge.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Model EP KHS 1000mm x 1mm Hand Operated Knife Type Guillotine Shear (Guarded) with front manually operated gauging rail, Table Height 750mm.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

CH 300 SA Double Column Automatic Horizontal Mitre Cutting Bandsaw, Rounds at 90 Degrees 300mm, Rectangles at 90 Degrees 350 X 300 mm, Capacities at 45 Degrees 260 Photosmm Rounds, 260 X 350mm Rectangles, Hydraulic Vice and Adjustment to Cutting Angle, Coolant. (2011)

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP NOTCH 80mm X 80mm X 1.5mm, Treadle Operated Corner Notching Machine with Bed Guides, Foot Pedal Control.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP Notch 200 x 200 x 6mm Hydraulic Fixed Angle Notching Machine with Bed Rule and Guides.

Please Note: This Lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP ETB-12 Power Operated Swaging Machine, Max Thickness 1.2mm, Throat Depth 200mm Speed 32rpm, Cylinder Length 140mm, Foot Pedal Control with Emergency Stop Button, Brake Motor Four Sets of Standard Rolls.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Rigid Model 535 2” Capacity Pipe Threading Machine on Stand with Dies, Single Phase Electrics

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

XYZ Model 1400 Centre Lathe, Gap Bed, 3 & 4 Jaw Chucks, Taper Turning Attachment, Faceplate and Outside Jaws (3 Jaw) Length Between Centres 1016mm, Centre Height 178mm, above The Bed 356mm, above Transversing Slide 203mm, Spindle Bore 41mm, Turning Speed 2000rpm, Single Motor Power 5.5kw

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Mitchell Gap Bed Centre Lathe 72” Between Centre, 3 & 4 Jaw Chucks, Fixed and Moving

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Harrison 11” Swing Gap Bed Centre Lathe with 3 Jaw Chuck and Set of Change Gears.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.