Matsuura Cubex 42 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 20000rpm, HSK 63 Spindle Taper, Axis Travels X=520mm Y=730mm Z=510mm A=120 Degrees (-110/+10) C=360 Degrees Rapid Feed Rates 50m/Min, Maximum Table Speed For Turning 1800rpm, 120 Station ATC,Pallet Diameter 300mm, Maximum Component Size H=350mm D=420mm, 40 Bar Through Spindle Coolant, FSE Filtration System, Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Filtermist FX5000 Fume Extractor, Swarf Bin, 2 Spare Pallets (Fixtures Not Included) S/No 18009 (3/2009)

Please Note: This Machine has had a new spindle end of 2016

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Matsuura Cubex 25 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 15000rpm, HSK 63 Spindle Taper, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed For Turning 3000rpm, Rapid Feedrates 50m/Min 150 Station ATC, FSE Filtration System 40 Bar Through Spindle Coolant, Filtermist FX4000 Fume Extraction, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm, Renishaw Probe Interface, Tool Presetter, Swarf Conveyor, Swarf Bin, Aproximately 12 Additional Pallets. S/No 17777 (7/2008)

Please Note: New spindle 2 years ago

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Matsuura MAM 72-63V Twin Pallet Vertical Machining Centre with Matsuura G-Tech 30i Control, Maximum Spindle Speed 12000rpm, BT40 Big Plus Spindle, Axis Travels X=760mm Y=845mm Z=610mm A=120 Degrees (-110/+10) C=360 Degrees, Rapid Feed Rates 50m/Min, Pallet Dimensions 500mm x 500mm, 240 Station ATC, Thgrough Spindle Coolant, FSE Filtration System with Coolant Chiller, FSE MMS Fume Extraction Unit, Renishaw Probe Interface, Renishaw Laser Tool Presetter, 2 Additional Pallets, Swarf Conveyor, Swarf Bin. S/No 16688 (7/2006)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Matsuura MAM 72-42V 5 Pallet Vertical Machining Centre with Matsuura G-Tech 30i Control, Maximum Spindle Speed 15000rpm, BT40 Big Plus Spindle, Axis Travels X=520mm Y=730mm Z=510mm A=120 Degrees (-110/+10) C=360 Degrees, Rapid Feed Rates 50m/Min, Pallet Dimensions 300mm x 300mm, 120 Station ATC, Through Spindle Coolant, FSE Coolant Filtation System, Filtermist FX5000 Fume Extractor, Renishaw Laser Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Swarf Bin.  S/No. 18025 (4/2009)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Matsuura MAM 72-35V 32 Pallet Vertical Machining Centre with Matsuura G-Tech 30i Control, Maximum Spindle Speed 15000rpm, BT40 Big Plus Spindle, Axis Travels X=680mm Y=385mm Z=625mm B=170 Degrees (-105/+65) C=360 Degrees, Rapid Feedrates 40m/Min, Pallet Diameter 130mm, 120 Station ATC, Renishaw NC4 Tool Presetter, Renishaw Probe Interface, Through Spindle Coolant, FSE Coolant Filtation System, Filtermist FX4000 Fume Extractor, Swarf Conveyor, Swarf Bin.  S/No 18014 (3/2009)

Please Note: This Item is located in Nuneaton, Warwickshire.Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Leadwell V40 Vertical Machining Centre with Heidenhain 426/430ME Control, Maximum Spindle Speed 8000rpm, BT40 Spindle Taper, Axis travels X=1020mm Y=465mm Z=610mm, Table Dimensions 500mm x 1200mm, 24 station ATC, Swarf Conveyor, Swarf Bin. S/No. L2TJJ1082 (7/2001)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Secos Easy Shrink 15 ZFM08IN. S/No. Q11-1006 (2011)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Niken E450 Tool Presetter with ISO 40 Holder and HSK63 Holder. S/No. 3086 (6/2004)

Please Note: This Item is located in Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Schunk Tribos, Polygonal Tool Clamping System

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

50 HSK63 Tool Holders

Please Note: Racks are not included

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.