Mikron UM600 3-Axis Vertical Machining Centre with Heidenhain TNC 426 Control, 6,000rpm Spindle, 22-Position Toolchanger, Table Size: 900mm x 530mm, Table Capacity: 400kg, X Axis = 600mm, Y Axis = 500mm, Z Axis = 450mm. S/No. 5471303 (1997)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

Tooling Trolley with Selection of Tooling

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

Fanuc WO CNC Wire EDM Machine with Fanuc Control, Max. Workpiece: 320 x 450 x 150mm, Table Stroke: 200 x 350mm. S/No. 7200055 (1987)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

AgieCut 100 Submerged 5-Axis CNC Wire EDM Machine with AgieMetic C CNC Control, Submerged Cutting, Auto Wire Thread, Wire Capacity: 0.15 – 0.33mm, Agie MM Generator ICS Standard Base, X = 300mm, Y = 200mm, Z = 256mm, Max. Workpiece Dimensions: X = 810mm, Y = 580mm, Z = 250mm, Max. Workpiece Weight: 450kg. S/No. 085 008

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

Charmilles Robofil 200 CNC Wire EDM Machine with Charmilles CNC Control, Submerged Cutting, Taper Angle: 0 – 30 degrees, Automatic Wire Threading, Filtration and Dielectric System and Manuals, X = 320mm, Y = 220mm, Z = 125mm, Max. Workpiece Dimensions: 900 x 520 x 150mm, Max. Workpiece Weight: 500kgs. S/No. 20351 (1989)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

Charmilles Roboform 200 CNC Die Sink EDM Machine with Charmilles CNC Control – on board Programming, ‘C’ Axis, 4-Station Toolchanger, Erowa Chuck on Quill, X = 320mm, Y = 220mm, Z = 320mm, C = 360degrees. S/No. 25791 (1989)

Please Note: This lot is located in Birmingham. 

System 3R 228/228J Block

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

TCS 50-Ton Spotting Press, Model 50/39, Bed Size: 1200 x 1170mm, 1200 x 1000mm Swing Down Bolster (1972)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

KRV 2000 Turret Mill with 50” x 10” Table, Newell C80 3-Axis D.R.O, ‘X’ Axis Power Feed, 50 – 4,200rpm, R8 Spindle. S/No. 10405 (2005)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle

Lilian 3VH Turret Mill with 50” x 10” Table, Newall Topaz 2-Axis D.R.O, X-Axis Powerfeed, 50 – 4200rpm R8 Spindle. S/No. 9870 (1999)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle