3098B - Heat Treatment Furnaces Linberg Heat Treatment Plant and ALD Aichelin Heat Treatment Plant with Salt Quench
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction End Date: 11th May 2022 at 14.00 (BST) - 15.00 (CET)
Offers Invited Prior to Auction
Please visit our other auctions:
3098A - Malmedie Bearing Cold Headers, Toolroom Machinery & Equipment, Fork Lift Trucks, Racking
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Virtual Tour
Auction Brochure
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 20
Lot *: Lindberg Tempering Heat Treatment Plant - Lots 500 to 504
Lindberg Tempering Heat Treatment Plant Consisting of lots 500 to 504
Lot 500 - Lindberg Gas Fired Pre Heat Heat Treatment Furnace, Type 304830 GF12, Max temp 650°c, Roll in Basket Width 800mm
Lot 501 - Lindberg Gas Fired Pre Heat Heat Treatment Furnace, Type 304830 GF12, Max temp 650°c, Roll in Basket Width 800mm
Lot 502 - Lindberg Pacemaker 1 SAS Fired Heat Treatment Furnace, Type PM304830.VT20.AQ1.R, Macx Temp 1090°C, 17kw. S/No. 1124.4175.537. Oil Quench Dip System below Ground
Lot 503 - Lindberg Pacemaker 2 SAS Fired Heat Treatment Furnace, Type PM304830.VT20.AQ1.R, Macx Temp 1090°C, 17kw. S/No. 1124.4175.537. Oil Quench Dip System below Ground
Lot 504 - Heat Treatment Wash System, Washes Component after Oil ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 500: Lindberg Gas Fired Pre Heat Heat Treatment Furnace, Type 304830 GF12
Lindberg Gas Fired Pre Heat Heat Treatment Furnace, Type 304830 GF12, Max temp 650°c, Roll in Basket Width 800mm
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Lindberg Tempering Heat Treatment Plant - Lots 500 to 504
Lot 501: Lindberg Gas Fired Pre Heat Heat Treatment Furnace, Type 304830 GF12
Lindberg Gas Fired Pre Heat Heat Treatment Furnace, Type 304830 GF12, Max temp 650°c, Roll in Basket Width 800mm
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Lindberg Tempering Heat Treatment Plant - Lots 500 to 504
Lot 502: Lindberg Pacemaker 1 SAS Fired Heat Treatment Furnace
Lindberg Pacemaker 1 SAS Fired Heat Treatment Furnace, Type PM304830.VT20.AQ1.R, Macx Temp 1090°C, 17kw. S/No. 1124.4175.537. Oil Quench Dip System below Ground
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Lindberg Tempering Heat Treatment Plant - Lots 500 to 504
Lot 503: Lindberg Pacemaker 2 SAS Fired Heat Treatment Furnace
Lindberg Pacemaker 2 SAS Fired Heat Treatment Furnace, Type PM304830.VT20.AQ1.R, Macx Temp 1090°C, 17kw. S/No. 1124.4175.537. Oil Quench Dip System below Ground
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Lindberg Tempering Heat Treatment Plant - Lots 500 to 504
Lot 504: Heat Treatment Wash System
Heat Treatment Wash System, Washes Component after Oil Quench Heat treatment, Gas Fired Heater System, Complete Electrical Control Panel with Siemens PLC Simatic S7 to run complete Heat Treatment, Pre Heat, HT and Wash Installed 2017, Infeed and Outfeed Roller Conveyor System for feeding HT Plant, (2) x Turn Tables each End 1400 x 750 Central Conveyor approx. 13m long, Track Mounted Basket Shuttle for Feeding HT and Wash Furness
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Lindberg Tempering Heat Treatment Plant - Lots 500 to 504
Lot 505: ALD Aichelin Roller Hearth Furnace Plant
ALD Aichelin Roller Hearth Furnace Plant, Fully Automated Electric Fired Loading, Hardening, Washing and Tempering Heat Treatment Plant. Salt Quench with Salt Regeneration. Siemens S5 Control and PLC System. Infeed tray Loading Conveyor with 600 x 600 mm Pallets. (2) x Salt Quench Bths, temper Thru Conveyor, Outfeed Chute to (2) x Conveyors. Furnace type Arlys 55/330, 11kw Power, Max temp 920°C. S/No. 94035.1100 (1995), Performance 37150 kj/h (200kg/h). Ekipo EV30 HPR Salt De-salination System. S/No. 94.035.1900 (1995)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being ...
Lot *: Combination of lots 506 to 517
Combination of Lots 506 to 517
Lot 506 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 507 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 508 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 509 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 510 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 511 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 512 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 513 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Lot 514 - (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 506: (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
(10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 507: (10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
(10) x Lingard Furnace HT Baskets (Stackable) Size 800 x 600 x 570mm
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.