3098A - Malmedie Bearing Cold Headers, Toolroom Machinery & Equipment, Fork Lift Trucks, Racking
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction End Date: 4th May 2022 at 14.00 (BST) - 15.00 (CET)
Please visit our other auctions:
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Virtual Tour
Auction Brochure
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 145
Lot 299: Hyster E2.00XMS Electric Fork Lift Truck
Hyster E2.00XMS Electric Fork Lift Truck, Capacity 2000kg, Lift Height 5550mm Triple Mast, Side Shift. S/No. D114A04358Y (2001)
PLEASE NOTE: UNFORTUNATELY THIS ITEM HAS BEEN WITHDRAWN FROM THE AUCTION.
We apologise for any inconvenience caused.
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 300: MSSO Super Vampire 280 Gap Bed Centre Lathe
MSSO Super Vampire 280 Gap Bed Centre Lathe, Distance between Centres 2100mm, Swing Over Bed 640mm diameter, 500mm Diameter 4 Jaw Chuck, Spindle Speeds 14 - 1000rpm, 3 Position Quick Change Tool Post, Spindle Bore 70mm. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 301: Sibimex 190/59 CU360mm Gap Bed Centre Lathe
Sibimex 190/59 CU360mm Gap Bed Centre Lathe, Distance between Centres 1400mm, Swing Over Bed 390mm Diameter, Spindle Speeds 35 - 2000rpm, 3 Postion QCTP. S/No. 34309 (2004) CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 302: Pasquino PA 250 Gap Bed Lathe
Pasquino PA 250 Gap Bed Lathe, Distance between Centres 1200mm, Swing Over Bed 500mm Diameter, Spindle Speeds 25 - 1400rpm, 3 Position Quick Change Tool Post, Spindle Bore 52mm. S/No. 30761. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 302A: Morin Giovanni SF1200 Centre Lathe
Morin Giovanni SF1200 Centre Lathe, Distance between Centres 1600mm, Swing Over Bed 1200mm, Swing Over Saddle 800mm, Spindle Speeds 10 -335rpm, 800mm 4 Jaw Chuck, 76mm Spindle Bore. S/No. 180-15 (1963) No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 303: Graziano Sag 180 Centre Lathe
Graziano Sag 180 Centre Lathe, Distance between Centres 1000mm, Swing Over Bed 340mm diameter, Spindle Speeds to 1500rpm, 2 Position Quick Change Tool Post. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 303A: Padova Italia JSS-230 Centre Lathe
Padova Italia JSS-230 Centre Lathe, Distance between Centres 1500mm, Swing Over Bed 460mm, Spindle Speeds 36 - 1200rpm, Spindle Bore 42mm. S/No. 01732 (1961) No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 304: Rambaudi MS3P Milling Machine
Rambaudi MS3P Milling Machine with Elbo Leo3e 3 Axis Dro, Table size 1200 x 300mm, Spindle Speeds 40 - 3000rpm, Vertical and Horizontal Spindle, Power Feeds to all Axis, 150mm Quill Travel, ISO 40 Taper on Vertical Head, ISO 50 Taper on Horizontal Spindle. S/No. L1086. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 305: Tiger FU-90 Universal Milling Machine
Tiger FU-90 Universal Milling Machine, Table size 1100 x 270mm, Spindle Speeds 24 - 1550rpm, ISO 40 Spindle Taper, Power Feeds to Axis. S/No. R406. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 306: Vertical Slotting Machine
Vertical Slotting Machine, Table Size 400 x 390mm. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.