3098 - Taper Roller Bearing Manufacturing Facility surplus to the ongoing requirements of a World Leading Bearing Manufacturer
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction End Date: 12th May 2022 at 14.00 (BST) - 15.00 (CET)
Please visit our other auctions:
3098A - Malmedie Bearing Cold Headers, Toolroom Machinery & Equipment, Fork Lift Trucks, Racking
Please Note: These items are located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Virtual Tours
Auction Brochure
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 64
Lot 1: Besly/Giustina Model 236 Double Disc Grinder
Besly/Giustina Model 236 Double Disc Grinder, One Piece Flow. S/No. 211 with Siemens Simatic HM1 Control, Metrel SP 700 Gauging System, Overhead Jib Crane 250kg Cap, Automated Loading and Unloading, Electrical Upgrade 2018. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: Prati Industria Meccanics Type R914 Double Disc Grinder
Prati Industria Meccanics Type R914 Double Disc Grinder, Plane Grinder One Piece Flow. S/No. 1533 (1999) with Siemens Control, Marposs Measurement Gauge, Automated Loading and Unloading System, Electrical Upgrade 2016, Sound Enclosure, Overhead Chain Hoist, Machine Weight: 14,000kg. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 3: WMW Mikrosa Model Rettifica Senza Central Through Feed OD Centreless Grinder
WMW Mikrosa Model Rettifica Senza Central Through Feed OD Centreless Grinder with Simatic OP17 Control, Extraction, Retrofitted 2005, External Diameter Wheel 800mm, Cutting Speed 50 m/sec, Automated Loading and Unloading, Machine Weight 16,500 kgs. S/No. 175/2578/05. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: WMW Mikrosa MOD SASL 5 /AD OD Through Feed OD Centreless Grinder
WMW Mikrosa MOD SASL 5 /AD OD Through Feed OD Centreless Grinder. S/No 18.23-07-11, Manual Control, Grinding Wheel Speed 200 rpm, Machine weight 12T. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: Cincinnati OD Centreless Grinder
Cincinnati OD Centreless Grinder. S/No. SM 20 HG5TN-16, Manual Controls, Twin Grip, 20" Wheel, Automated Loading and Unloading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot *: Combination of lots 6, 7 & 8
Combination of lots 6, 7 & 8
Lot 6 - amir Type External / Internal Ring Grinder, One Piece Flow. S/No. 90/2073/02 Internal Ring Size Øe Max 280mm B max 40mm, Øe min 155mm B min 20mm, Outer Ring Size Øe Max 320mm B Max 32mm, Øe Min 180mm B Min 15mm with Siemens Sinumerik Control, Electrical and Mechanical Upgrades 2002, Automated Loading and Unloading. CE Marked
Lot 7 - Famir Type RTFO 250/300 CO/B ID Grinder One Piece Flow. S/No. 013900 (1980) with Siemens Sinumerik Control, Marposs E9 Measurement Gauge, Automated Loading and Unloading, Electrical Upgrade 2007. No CE Mark
Lot 8 - Bearing Honing Machine. S/No. 001-2003 with Siemens Simatic Control, Automated Loading and Unloading. No CE Mark
Please Note: This lot ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 6 | Famir Type External / Internal Ring Grinder |
| 7 | Famir Type RTFO 250/300 CO/B ID Grinder |
| 8 | Honing Machine |
Lot 6: Famir Type External / Internal Ring Grinder
Famir Type External / Internal Ring Grinder, One Piece Flow. S/No. 90/2073/02 Internal Ring Size Øe Max 280mm B max 40mm, Øe min 155mm B min 20mm, Outer Ring Size Øe Max 320mm B Max 32mm, Øe Min 180mm B Min 15mm with Siemens Sinumerik Control, Electrical and Mechanical Upgrades 2002, Automated Loading and Unloading. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 7: Famir Type RTFO 250/300 CO/B ID Grinder
Famir Type RTFO 250/300 CO/B ID Grinder One Piece Flow. S/No. 013900 (1980) with Siemens Sinumerik Control, Marposs E9 Measurement Gauge, Automated Loading and Unloading, Electrical Upgrade 2007. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 8: Honing Machine
Bearing Honing Machine. S/No. 001-2003 with Siemens Simatic Control, Automated Loading and Unloading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Anelli Esterni Linea / External Ring Grinding Line 6 - 12" (152 - 320mm)
Anelli Esterni Linea / External Ring Grinding Line 6 - 12" (152 - 320mm)
Comprising of Lots 9, 10, 11, 12 & 13
Lot 9 - Cincinnati ID Grinder. With Rafra Twin Pick and Place Arm, Siemens Simatic Touch Screen for pick and place S/No. 315REL (2008) Siemens Simatic OP17 machine control, Automated Unloading, Dynamic Wheel Balancing, Marposs Measurement Gauge, Overhead Wheel Dresser not included. Electrics Retrofit by Tecnosystem in 2003. CE Marked
Lot 10 - Heald Model 2CF90 ID Grinder One Piece Flow. S/No. 129/2347/03, Max Outside Diameter of Work 8" Min 4", Siemens Control, Marposs E 5 Measurement Gauge, Automated Loading and Unloading, Rafra Twin Pick and Place Arm. S/No. 316REL (2008) Electrics Retrofit by Tecnosystem ...