3098 - Taper Roller Bearing Manufacturing Facility surplus to the ongoing requirements of a World Leading Bearing Manufacturer
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction End Date: 12th May 2022 at 14.00 (BST) - 15.00 (CET)
Please visit our other auctions:
3098A - Malmedie Bearing Cold Headers, Toolroom Machinery & Equipment, Fork Lift Trucks, Racking
Please Note: These items are located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Virtual Tours
Auction Brochure
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 51-60 de 64
Lot 42: Amog Bearing Check Ring Station
Amog Bearing Check Ring Station with Magnetic Base, Siemens OP7 Control, Unloading Conveyor with De-magnetiser. No CE Mark. Note Bearing Check Ring Gauge and PLC Not Included
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 6 3.93 - 7.08" (100 - 180mm)
Lot 43: Bearing Honing Machine
Bearing Honing Machine with VSE Control Panel. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 6 3.93 - 7.08" (100 - 180mm)
Lot *: Anelli Interni Linea / Internal Ring Grinding Line 5, 3.93 - 7.08" (100 - 180mm)
Anelli Interni Linea / Internal Ring Grinding Line 5, 3.93 - 7.08" (100 - 180mm)
Comprising of lots 44, 45, 46, 47 & 48
Lot 44 - Famir Type RTF-DI.180/180.CP/CNC OD Grinder One Piece Flow S/No. 2083. Min Dia Ring 50mm, Max 180m, Max Thickness 60mm, Cutting Speed 60m/sec with Logan U Pos/1 plc Control, Automated Loading and Unloading. No CE Mark
Lot 45 - Famir Type RTF-D1 180/180 CS1/CNC Rib Grinder one Piece Flow. S/No. 2086 Min Dia Ring 50mm, Max 180mm, Max Thickness 60mm, Cutting Speed 60m/sec with Logan U Pos/1 plc Control, Automated Loading and Unloading with Demagnetiser. No CE Mark
lot 46 - Famir MOD RTF0-DI 180/180 CD/CNC ID Grinder One Piece Flow. S/No. 2087 Min Dia Ring 50mm, Max 180mm, Max Thickness ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 44: Famir Type RTF-DI.180/180.CP/CNC OD Grinder
Famir Type RTF-DI.180/180.CP/CNC OD Grinder One Piece Flow S/No. 2083. Min Dia Ring 50mm, Max 180m, Max Thickness 60mm, Cutting Speed 60m/sec with Logan U Pos/1 plc Control, Automated Loading and Unloading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 5, 3.93 - 7.08" (100 - 180mm)
Lot 45: Famir Type RTF-D1 180/180 CS1/CNC Rib Grinder
Famir Type RTF-D1 180/180 CS1/CNC Rib Grinder one Piece Flow. S/No. 2086 Min Dia Ring 50mm, Max 180mm, Max Thickness 60mm, Cutting Speed 60m/sec with Logan U Pos/1 plc Control, Automated Loading and Unloading with Demagnetiser. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 5, 3.93 - 7.08" (100 - 180mm)
Lot 46: Famir MOD RTF0-DI 180/180 CD/CNC ID Grinder
Famir MOD RTF0-DI 180/180 CD/CNC ID Grinder One Piece Flow. S/No. 2087 Min Dia Ring 50mm, Max 180mm, Max Thickness 60mm, Cutting Speed 60m/sec with Logan plc control, Marposs E5 Measurement Gauge, Automated Loading and Unloading with De-magnetiser. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 5, 3.93 - 7.08" (100 - 180mm)
Lot 47: Amog Bearing Check Ring Station
Amog Bearing Check Ring Station with Magnetic Base. Note Bearing Check Ring Gauge and PLC Not Included. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 5, 3.93 - 7.08" (100 - 180mm)
Lot 48: Bearing Honing Machine
Bearing Honing Machine with VSE Control and Automated Unloading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 5, 3.93 - 7.08" (100 - 180mm)
Lot 48A: O.ERRE PL Model External Lapping Machine Type SF8S / 300 Honing Machine
O.ERRE PL Model External Lapping Machine Type SF8S / 300 Honing Machine. S/No. 23/03/1851/98 (1998) No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 49: Amog Track Lapping External Rings Twin Head Honing Machine
Amog Track Lapping External Rings Twin Head Honing Machine, Manual Controls, Automated Loading and Unloading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.