3098 - Taper Roller Bearing Manufacturing Facility surplus to the ongoing requirements of a World Leading Bearing Manufacturer
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction End Date: 12th May 2022 at 14.00 (BST) - 15.00 (CET)
Please visit our other auctions:
3098A - Malmedie Bearing Cold Headers, Toolroom Machinery & Equipment, Fork Lift Trucks, Racking
Please Note: These items are located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Virtual Tours
Auction Brochure
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 64
Lot 17: Famir Type RTF-B-180-CB Grinder
Famir Type RTF-B-180-CB Grinder S/No. 1003 Checking Station, Siemens Simatic OP17, E9 Marposs Measurement Gauge, SBS Balance System SB-5500 Wheel Balance Gauging, Carousel Automated Delivery, GIS 200kg Jib Crane. Overhead Wheel Dresser and Control not included, Old Dresser Available. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Lot 18: Famir Type RTSB/180 Rib Grinder
Famir Type RTSB/180 Rib Grinder One Piece Flow, S/No. 1253 Cutting Speed 60m/sec. Manual and Siemens Simatic OP17 Control, Automated Loading and Unloading, Checking Station, Electrical Upgrade 2016. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Lot 19: Heald Type 2CF90 Inner Grinder
Heald Type 2CF90 Inner Grinder Bore Race One Piece Flow. Max Outside of Workpiece 8" Min 4" with Siemens Sinumerik Control, Marposs P3 ME Measurement Gauge, Automated Unloading. Electrics Retrofit in 2017. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Lot 20: Bearing Check Ring Station
Bearing Check Ring Station with Magnetic Base and Siemens Simatic HMI Control, Unloading Conveyor and Bearing Pusher. Note Bearing Check Ring Gauge and PLC Not Included. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Lot 21: Per Or E.IR Universal Honing Machine
Per Or E.IR Universal Honing Machine. S/No.72/2133/01 Siemens Simatic Panel, Unloading Conveyor Retrofitted 2001 CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Lot 22: Scissor Lift Pallet Lifter
Scissor Lift Pallet Lifter
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Lot *: Anelli Interni Linea / Internal Ring Grinding Line 3 1.77 - 5.39" 55 - 137mm
Anelli Interni Linea / Internal Ring Grinding Line 3 1.77 - 5.39" 55 - 137mm
Comprising of lots 23, 24, 25, 26 & 27
Lot 23 - Famir Model RTFO.D 250/300.CO/B ID Grinder One Piece Flow. S/No. 2039, (1988) Manual Controls, Marposs P3 ME Measurement Gauge, Automated Loading and Unloading with Demagnetiser, Updated Hydraulics. No CE Mark
Lot 24 - Nova Model PGE 10 150.C Rib Grinder One Piece Flow. S/No. 1905078001 (1980) Internal Ring Dimensions D Max 150mm, Min 50mm B Max 50mm Min 20mm (see attached diagram) Manual Controls, Automated Loading and Unloading. No CE Mark
Lot 25 - Nova Model PGE 10 150 OD Grinder Race One Piece Flow. S/No. 14308 Internal Ring Dimensions D Max 150mm Min 50mm, B Max 50mm Min 20mm (see attached diagram) ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 23 | Famir Model RTFO/300 CO/B ID Grinder |
| 24 | Nova Model PGE10 150 Rib Grinder |
| 25 | Nova Model PGE 10 150 OD Grinder |
| 26 | Bearing Check Ring Station |
| 27 | Bearing Honing Machine |
Lot 23: Famir Model RTFO/300 CO/B ID Grinder
Famir Model RTFO.D 250/300.CO/B ID Grinder One Piece Flow. S/No. 2039, (1988) Manual Controls, Marposs P3 ME Measurement Gauge, Automated Loading and Unloading with Demagnetiser, Updated Hydraulics. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 3 1.77 - 5.39" 55 - 137mm
Lot 24: Nova Model PGE10 150 Rib Grinder
Nova Model PGE 10 150.C Rib Grinder One Piece Flow. S/No. 1905078001 (1980) Internal Ring Dimensions D Max 150mm, Min 50mm B Max 50mm Min 20mm (see attached diagram) Manual Controls, Automated Loading and Unloading. No CE Mark
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 3 1.77 - 5.39" 55 - 137mm
Lot 25: Nova Model PGE 10 150 OD Grinder
Nova Model PGE 10 150 OD Grinder Race One Piece Flow. S/No. 14308 Internal Ring Dimensions D Max 150mm Min 50mm, B Max 50mm Min 20mm (see attached diagram) with Siemens 840 Sinumerik Control, Automated Loading and Unloading, Carousel, De-magnetiser, Mechanics and Electrics, Upgrade 2007, CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni Linea / Internal Ring Grinding Line 3 1.77 - 5.39" 55 - 137mm