3098 - Taper Roller Bearing Manufacturing Facility surplus to the ongoing requirements of a World Leading Bearing Manufacturer
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction End Date: 12th May 2022 at 14.00 (BST) - 15.00 (CET)
Please visit our other auctions:
3098A - Malmedie Bearing Cold Headers, Toolroom Machinery & Equipment, Fork Lift Trucks, Racking
Please Note: These items are located in Brescia, Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Virtual Tours
Auction Brochure
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 64
Lot 9: Cincinnati OD Grinder
Cincinnati OD Grinder. With Rafra Twin Pick and Place Arm, Siemens Simatic Touch Screen for pick and place S/No. 315REL (2008) Siemens Simatic OP17 machine control, Automated Unloading, Dynamic Wheel Balancing, Marposs Measurement Gauge, Overhead Wheel Dresser and Control not included. Electrics Retrofit by Tecnosystem in 2003. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Esterni Linea / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot 10: Heald Model 2CF90 ID Grinder
Heald Model 2CF90 ID Grinder One Piece Flow. S/No. 129/2347/03, Max Outside Diameter of Work 8" Min 4", Siemens Control, Marposs E 5 Measurement Gauge, Automated Loading and Unloading, Rafra Twin Pick and Place Arm. S/No. 316REL (2008) Electrics Retrofit by Tecnosystem in 2003. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Esterni Linea / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot 11: Bearing Check Ring Station
Bearing Check Ring Station with Magnetic Base, Outfeed and Transfer Conveyor with Siemens Simatic OP7 and Siemens Touchscreen Controls. Electrics Retrofit by biellebi in 2004. No Check Ring Gauge and PLC Included
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Esterni Linea / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot 12: Model Cincinnati Rib Grinder
Model R Cincinnati Rib Grinder One Piece Flow S/No. 95/2312/02 Internal Ring Dimensions Ø e Max 300mm Min 80mm, B Max 60mm min 15mm (see attached diagram) Retrofitted 2002 Weight 7500kg, Elevator Infeed, Siemens TD200, Outfeed Conveyor To De-magnetiser Unit, CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Esterni Linea / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot 13: O.ERREPI Internal / External Rings Universal Honing Machine
O.ERREPI Internal / External Rings, Universal Honing Machine. S/No. 441/5328/11, Siemens Simatic Panel Automated Loading and Unloading Sick Light Guarding. CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Esterni Linea / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot *: Anelli Interni /Esterni Linea, Internal / External Ring Grinding Line 6 - 12" (152 - 320mm)
Anelli Interni /Esterni Linea, Internal / External Ring Grinding Line 6 - 12" (152 - 320mm)
Comprising of Lots 14, 15 & 16
Lot 14 - Cincinnati OD Grinder Once Piece Flow. S/No. 94/2311/02 Internal Ring Dimensions Ø e Max 300mm Min 80mm, B Max 60mm min 15mm (see attached diagram) with Siemens Simatic OP17 Control, Retrofitted 2002 CE Marked
lot 15 - Heald 2CF90 ID Grinder Once Piece Flow. S/No. 93/2310/02, Max Outside Diameter of Work 8" Min 4" with Siemens Control, Marposs C9 Measurement Gauge, Retrofitted 2000, CE Marked
Lot 16 - PERE1R Type Universal Honing Machine. S/No. 70/2133/01 with Siemens Control, Conveyor Delivery with De-magnetiser, Retrofitted 2001 CE Marked
Please Note: This lot is located in Italy. ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 14 | Cincinnati OD Grinder |
| 15 | Heald 2CF90 ID Grinder |
| 16 | PERE1R Type Universal Honing Machine |
Lot 14: Cincinnati OD Grinder
Cincinnati OD Grinder Once Piece Flow. S/No. 94/2311/02 Internal Ring Dimensions Ø e Max 300mm Min 80mm, B Max 60mm min 15mm (see attached diagram) with Siemens Simatic OP17 Control, Retrofitted 2002 CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni /Esterni Linea, Internal / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot 15: Heald 2CF90 ID Grinder
Heald 2CF90 ID Grinder Once Piece Flow. S/No. 93/2310/02, Max Outside Diameter of Work 8" Min 4" with Siemens Control, Marposs C9 Measurement Gauge, Retrofitted 2000, CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni /Esterni Linea, Internal / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot 16: PERE1R Type Universal Honing Machine
PERE1R Type Universal Honing Machine. S/No. 70/2133/01 with Siemens Control, Conveyor Delivery with De-magnetiser, Retrofitted 2001 CE Marked
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*: Anelli Interni /Esterni Linea, Internal / External Ring Grinding Line 6 - 12" (152 - 320mm)
Lot *: Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Anelli Interni Linea / Internal Line 4 3.93 - 9.85" (100 - 250mm)
Comprising of Lots 17, 18, 19, 20 , 21 & 22
Lot 17 - Famir Type RTF-B-180-CB Grinder S/No. 1003 Checking Station, Siemens Simatic OP17, E9 Marposs Measurement Gauge, SBS Balance System SB-5500 Wheel Balance Gauging, Carousel Automated Delivery, GIS 200kg Jib Crane. No CE Mark
Lot 18 - Famir Type RTSB/180 Rib Grinder One Piece Flow, S/No. 1253 Cutting Speed 60m/sec. Manual and Siemens Simatic OP17 Control, Automated Loading and Unloading, Checking Station, Electrical Upgrade 2016. No CE Mark
lot 19 - Heald Type 2CF90 Inner Grinder Bore Race One Piece Flow. Max Outside of Workpiece 8" Min 4" with Siemens Sinumerik Control, Marposs P3 ME Measurement ...