3020 - Okuma, Hyundai, Brother Horizontal & Vertical Machining Centres, Vertical Lathe and Drilling and Tapping Centre surplus to the ongoing requirements of a retained client
Engineering
Asta conclusa il
Tempo residuo
Descrizione asta
Please Note: These lots are located in Vicenza, Veneto, Italy. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 18.00%.
IVA
IVA applicata pari al 22.00%.
Date ispezioni
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.
Avviso ai compratori
Termine ultimo pagamento
Termine ultimo ritiro
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lotti 1-7 di 7
Lotto 1: Okuma Model VH40 II Vertical Machining Centre (2000)
Okuma Model VH40 II Vertical Machining Centre, Government Unit: OSP 700M, 60 Tools BT 40 12,000rpm, Table Surface 400 x 400mm, Admitted Load 350kg, Working Dimensions - Linear Axes, X Azis Stroke (Table) 60mm, Y Axis Stroke (Slide) 450mm, Z Axis Stroke (Spindle Head) 450mm. S/No. 0185 (2000). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotto 2: Okuma Model VR40 II Vertical Machining Centre (1994)
Okuma Model VR40 II Vertical Machining Centre, Strokes 560 x 500 x 500, 8000 Revolutions, 24 Tools BT40, X Axis Travel: 560mm, Y Axis Travel: 500mm, Z Axis Travel: 500mm. S/No. 0241 (1994). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotto 3: Okuma Model MX-45 VAE Vertical Machining Centre (1999)
Okuma Model MX-45 VAE Vertical Machining Centre with Numerical OSP 700m Control, Table Dimensions 460mm x 1000, Longitudinal Stroke 762mm, Cross Travel 460mm, Vertical Stroke 450mm, Spindle Connection Type BT40, Max Spindle Speed 12,000rpm, Tool Magazine No. 40, Vertical Centre for Pallet Change, Okuma Builder. S/No. 1688 (1999). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotto 4: Okuma Model VH40 Vertical Machining Centre (1995)
Okuma Model VH40 Vertical Machining Centre, Government Unit: OSP 700m, 24 Tools BT40, 8,000rpm, Table Surface 400 x 400mm, Admitted Load 250kg, Working Dimensions - Linear Axes, X Axis Stroke (Table) 560mm, Y Axis Stroke (Slide) 450mm, Z Axis Stroke (Spindle Head) 450mm. S/No. 0012 (1995). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotto 5: Okuma Model MA 40 Horizontal Machining Centre (1999)
Okuma Model MA 40 Horizontal Machining Centre (1999), CNC OSP U 100M, Refridgeration Through Spindle, Chip Conveyor, 12,000 Spindle Revolutions, ATC 40 Positions BT40, Presetting, Table: Useful Surfaces 400 x 400mm, Admitted Load 400kg, Maximum Rotaion Dimensions 600 x 710mm. STD Divisions 1st, Pallet Change Time SEC 7, Working Dimensions - Linear Axes: Strokes X 560, Y 610, Z 560mm, Distance betweeen Spindle Centre / Table Surface 50 - 660mm, Distance between Spindle Nose / Table Centre 150 - 710mm, Rapid feeds Axes XYZ 40,000mm/Min, Working Advances 40,000mm/Min, Main Spindle: Spindle Cone Attachment BT40, MAS Locking Shank 2, Front Bearing Diameter 85mm, Max Spindle Revolutions Std. 12,000, Max Available Power KW ...
Lotto 6: Brother Model TC 32A Vertical Centre (2000)
Brother Model TC 32A Vertical Centre, Pallet Change with 4 Axis, Longitudinal Travel X 450mm, Cross Stroke Y 320mm, Vertical Travel Z 410mm, Table Length 550mm, Table Width 350mm, Tool Magazines 40, Spindle Connection BT30, Maximum Spindle Speed 12,000rpm. (2000). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotto 7: Hyundai SKT 21 VM CNC Vertical Lathe (2005)
Hyundai SKT 21 VM CNC Vertical Lathe with Fanuc Control, Max working Ø 350mm, Max Working Length 150mm. X Axis Travel 1255mm, Z Axis Stroke 320mm, Mandrel Power 11kw, 12-Position Tool Changer, Motorizable, Accuracy 0.006mm, Repeatability 0.001mm, 02 Driven Tools, Chip Conveyor - Dimensions approx. 7000mm x 2100mm x 2700mm, weight Approx. 5500kg S/No. SKT21VM015 (2005). Country of Origin: Korea
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.