3020 - Okuma, Hyundai, Brother Horizontal & Vertical Machining Centres, Vertical Lathe and Drilling and Tapping Centre surplus to the ongoing requirements of a retained client
Engineering
Auction ended on
Time left
Auction description
Please Note: These lots are located in Vicenza, Veneto, Italy. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Buyer's premium
Buyer's Premium will be charged at 18.00%.
VAT
Value added tax will be charged at 22.00%.
Viewing times
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.
Notice to purchasers
Final payment date
Final clearance date
Shipping agents
Storage contractors
Exporting/Importing from the UK details
Lots 1-7 of 7
Lot 1: Okuma Model VH40 II Vertical Machining Centre (2000)
Okuma Model VH40 II Vertical Machining Centre, Government Unit: OSP 700M, 60 Tools BT 40 12,000rpm, Table Surface 400 x 400mm, Admitted Load 350kg, Working Dimensions - Linear Axes, X Azis Stroke (Table) 60mm, Y Axis Stroke (Slide) 450mm, Z Axis Stroke (Spindle Head) 450mm. S/No. 0185 (2000). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: Okuma Model VR40 II Vertical Machining Centre (1994)
Okuma Model VR40 II Vertical Machining Centre, Strokes 560 x 500 x 500, 8000 Revolutions, 24 Tools BT40, X Axis Travel: 560mm, Y Axis Travel: 500mm, Z Axis Travel: 500mm. S/No. 0241 (1994). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 3: Okuma Model MX-45 VAE Vertical Machining Centre (1999)
Okuma Model MX-45 VAE Vertical Machining Centre with Numerical OSP 700m Control, Table Dimensions 460mm x 1000, Longitudinal Stroke 762mm, Cross Travel 460mm, Vertical Stroke 450mm, Spindle Connection Type BT40, Max Spindle Speed 12,000rpm, Tool Magazine No. 40, Vertical Centre for Pallet Change, Okuma Builder. S/No. 1688 (1999). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: Okuma Model VH40 Vertical Machining Centre (1995)
Okuma Model VH40 Vertical Machining Centre, Government Unit: OSP 700m, 24 Tools BT40, 8,000rpm, Table Surface 400 x 400mm, Admitted Load 250kg, Working Dimensions - Linear Axes, X Axis Stroke (Table) 560mm, Y Axis Stroke (Slide) 450mm, Z Axis Stroke (Spindle Head) 450mm. S/No. 0012 (1995). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: Okuma Model MA 40 Horizontal Machining Centre (1999)
Okuma Model MA 40 Horizontal Machining Centre (1999), CNC OSP U 100M, Refridgeration Through Spindle, Chip Conveyor, 12,000 Spindle Revolutions, ATC 40 Positions BT40, Presetting, Table: Useful Surfaces 400 x 400mm, Admitted Load 400kg, Maximum Rotaion Dimensions 600 x 710mm. STD Divisions 1st, Pallet Change Time SEC 7, Working Dimensions - Linear Axes: Strokes X 560, Y 610, Z 560mm, Distance betweeen Spindle Centre / Table Surface 50 - 660mm, Distance between Spindle Nose / Table Centre 150 - 710mm, Rapid feeds Axes XYZ 40,000mm/Min, Working Advances 40,000mm/Min, Main Spindle: Spindle Cone Attachment BT40, MAS Locking Shank 2, Front Bearing Diameter 85mm, Max Spindle Revolutions Std. 12,000, Max Available Power KW ...
Lot 6: Brother Model TC 32A Vertical Centre (2000)
Brother Model TC 32A Vertical Centre, Pallet Change with 4 Axis, Longitudinal Travel X 450mm, Cross Stroke Y 320mm, Vertical Travel Z 410mm, Table Length 550mm, Table Width 350mm, Tool Magazines 40, Spindle Connection BT30, Maximum Spindle Speed 12,000rpm. (2000). Country of Origin: Japan
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 7: Hyundai SKT 21 VM CNC Vertical Lathe (2005)
Hyundai SKT 21 VM CNC Vertical Lathe with Fanuc Control, Max working Ø 350mm, Max Working Length 150mm. X Axis Travel 1255mm, Z Axis Stroke 320mm, Mandrel Power 11kw, 12-Position Tool Changer, Motorizable, Accuracy 0.006mm, Repeatability 0.001mm, 02 Driven Tools, Chip Conveyor - Dimensions approx. 7000mm x 2100mm x 2700mm, weight Approx. 5500kg S/No. SKT21VM015 (2005). Country of Origin: Korea
Please Note: This lot is located in Vicenza, Veneto, Italy. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.