3005 - Dugard Lathe, Dugard, Daewoo, Hurco & Hartford Vertical Machining Centres, Poly Gim Diamond & CMZ Turning Centres plus many Ancillary items no longer required due to the Reorganisation of Constant Precision
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: This auction has a strict clearance date of Thursday 5th August 2021.
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Lot 90 is located in Birmingham
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 31-40 de 115
Lot *: Combination of lots 9, 9A & 9B
Combination of lots 9, 9A & 9B
Lot 9 - XYZ Proturn 410 CNC Lathe, Model 470 S/No. 095 (1998) with Prototrak LX2 2 Axis Control (Refurbished In 2016), 470 Swing X 1250mm Between Centres, 15 To 2500rpm, 80mm Spindle Bore, 10” 3 Jaw Chuck, 12” 4 Jaw Chuck, Quick Release Collet Chuck, 3 Point Steady, Quick Change Toolpost with Toolholders Coolant Equipment. Country of Origin: Taiwan
Lot 9A - Qty of Quick Change Tooling. Country of Origin: United Kingdom
Lot 9B - Qty of Quick Change Tooling
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
9 | XYZ Proturn 410 CNC Lathe Model 470 (1998) |
9A | Qty of Quick Change Tooling |
9B | Qty of Quick Change Tooling |
Lot 10: Colchester Student 1800 X 30” Gap Bed Centre Lathe
Colchester Student 1800 X 30” Gap Bed Centre Lathe. S/No. 4/0008/06815 with 10” 3 Jaw Chuck, Collet Chuck, Quick Change Tool Post with Toolholders, 8” 3 Jaw Chuck, 3 Point Steady, Mitutoyo Linear Scale 2 Axis Digital Readout, 22 to 1800rpm. Country of Origin: United Kingdom
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 10A: Qty of Quick Change Tooling
Qty of Quick Change Tooling. Country of Origin: United Kingdom
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 10 & 10A
Combination of lots 10 & 10A
Lot 10 - Colchester Student 1800 X 30” Gap Bed Centre Lathe. S/No. 4/0008/06815 with 10” 3 Jaw Chuck, Collet Chuck, Quick Change Tool Post with Toolholders, 8” 3 Jaw Chuck, 3 Point Steady, Mitutoyo Linear Scale 2 Axis Digital Readout, 22 to 1800rpm. Country of Origin: United Kingdom
Lot 10A - Qty of Quick Change Tooling. Country of Origin: United Kingdom
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
10 | Colchester Student 1800 X 30” Gap Bed Centre Lathe |
10A | Qty of Quick Change Tooling |
Lot 11: SEMCO LC185VS Vertical Turret Milling Machine
SEMCO LC185VS Vertical Turret Milling Machine. S/No. 51102006 with DRO II 3 M Inch Metric Digital Readout, 1270 X 260mm Table, Spindle Speeds to 3750rpm Spindle Taper R8, Power Feeds X & Y Axis. Country of Origin: Taiwan
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...
Lot 12: SHIZUOKA VHR-G Vertical Horizontal Turret Milling Machine
SHIZUOKA VHR-G Vertical Horizontal Turret Milling Machine. S/No. 8178 with Newall DP700 Inch/Metric Digital Readout, Arbors and Supports For Horizontal Spindle. 1300 X 280mm Table 7.5 to 3600rpm Vertical Spindle 90 To 1400rpm Horizontal Spindle. Country of Origin: Japan
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 12A: Qty of International Tooling
Qty of International Tooling. Country of Origin: United Kingdom
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 12 & 12A
Combination of lots 12 & 12A
Lot 12 - SHIZUOKA VHR-G Vertical Horizontal Turret Milling Machine. S/No. 8178 with Newall DP700 Inch/Metric Digital Readout, Arbors and Supports For Horizontal Spindle. 1300 X 280mm Table 7.5 to 3600rpm Vertical Spindle 90 To 1400rpm Horizontal Spindle. Country of Origin: Japan
Lot 12A - Qty of International Tooling. Country of Origin: United Kingdom
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
12 | SHIZUOKA VHR-G Vertical Horizontal Turret Milling Machine |
12A | Qty of International Tooling |
Lot 13: Jones & Shipman 540P Horizontal Surface Grinder.
Jones & Shipman 540P Horizontal Surface Grinder. S/No. 67592 Machine No. 1761/57 with 6 X 18” Magnetic Chuck, Coolant Equipment. Country of Origin: United Kingdom
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January ...
Lot 14: Addison (Cosen) AH1010 JAY Horizontal Bandsaw (1976)
Addison (Cosen) AH1010 JAY Horizontal Bandsaw. S/No. 854497 (1976) with (2) New Spare Blades, Machine Weight 450kg, MI.VA Model 250 Metalworking Cut Off Saw. S/No. 13188 (1998). Country of Origin: United Kingdom
Please Note: These lots are located in Bedford, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a ...