2961 - CNC Machining Centres & Lathes, Conventional Machine Tools, Inspection Equipment surplus to ongoing requirements due to reinvestment in New Machinery by Yorkshire Precision Engineering Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 113
Lot 1: Haas ST20SS CNC Lathe (2010)
Haas ST20SS CNC Lathe (2010) with Haas Control, 3 Jaw Chuck, Tooleye, 200mm 3 Jaw Chuck, Tailstock, 24 Station Turret, Swarf Conveyor. S/No. 3086505 including Tooling - Country of Origin - USA
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: Haas SL-20TCE CNC Lathe (2005)
Haas SL-20TCE CNC Lathe (2005) with Haas Control, 3 Jaw Chuck, Tooleye, 200mm 3 Jaw Chuck, 10 Station Turret, Tailstock. S/No. 70306 Haas Servo Bar 300 Barfeed including Tooling - Country of Origin - USA
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 3: Nakamura-Tome TW10 CNC Lathe
Nakamura-Tome TW10 CNC Lathe with Fanuc Control, Tooleye, Collet Chuck Sub-spindle 130mm 3 Jaw Chuck, Twin Spindle, Swarf Conveyor. S/No. 92110614 CNC Boss 542 Barfeed (2) x 12 Station Turrets. This machine has the option of Live Tooling - Country of Origin - Japan
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically ...
Lot 4: ZPS S50 CNC Lathe (1997)
ZPS S50 CNC Lathe (1997) with GE Fanuc Series O-T Control, 12 Station Turret, 250mm 3 Jaw Chuck, Tailstock, Swarf Conveyor. S/No. 221121-0225 - Country of Origin - Czech Republic
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: ZPS S50 CNC Lathe (1996)
ZPS S50 CNC Lathe (1996) with GE Fanuc Series OT-Control, 12 Station Turret, 210mm 3 Jaw Chuck, Tailstock. S/No. 221 121-0142 - Country of Origin - Czech Republic
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 6: Nakamura Tome TMC 4 CNC Lathe
Nakamura Tome TMC 4 CNC Lathe with Fanuc System 6T Control, 300mm 3 Jaw Chuck, 12 Station Turret, S/No. 44604 LNS Hydro Bar Barfeed. - Country of Origin - Japan
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 6A: Collet Chuck and Collets Suitable for Nakamura Tome TMC 4
Collet Chuck and Collets Suitable for Nakamura Tome TMC 4
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 7: Nakamura Tome TMC 3 CNC Lathe
Nakamura Tome TMC 3 CNC Lathe with System 6T Control, 200mm 3 Jaw Chuck, Tailstock, 12 Station Turret, S/No. 13605 LNS Hydrobar Barfeed - Country of Origin - Japan
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 8: Takisawa TC-3 CNC Lathe
Takisawa TC-3 CNC Lathe with Fanuc Series 15-T Control, 250mm 3 Jaw Chuck, Tailstock, 8 Station Turret. S/No. THU BP9107 - Country of Origin - Japan
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 9: Takisawa TS-15 CNC Lathe
Takisawa TS-15 CNC Lathe with Fanuc System 3T Control, 12 Station Turret, Collet Chuck, Tailstock. S/No. THCP4401 (Spares or repairs - we recommend inspection prior to bidding) -Country of Origin - Japan
Please Note: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.