2886 - CNC Lathes, Vertical Machining Centres, Bed Mills & Toolroom Equipment no longer required by Micron Machining Services Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These items are located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 31-40 de 116
Lot 14: Union BFT 80/2 Horizontal Borer
Union BFT 80/2 Horizontal Borer with II-3M D.R.O, Table Size: 1,110 x 990mm, 500mm Faceplate, Spindle Head. S/No. 25579
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 15: TOS W100A Horizontal Borer
TOS W100A Horizontal Borer with Acu-Rite III D.R.O, Table Size: 1,240 x 1,240mm, Faceplate: 600mm. S/No. 23-01 (1989)
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 15A: Qty of CAT, BT & ISO Tooling
Qty of CAT, BT & ISO Tooling, suitable for TOS Borer with Clamping Sets, Parallels & Benches
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 16: Colchester Mastiff Lathe
Colchester Mastiff Lathe with 310mm 3-Jaw Chuck, Polishing Attachment, Toolpost 3-Point Steady, Distance between Centres: 3,000mm. S/No. 8/0209/03616
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 17: Colchester Triumph 2500 Gap Bed Lathe
Colchester Triumph 2500 Gap Bed Lathe with Newall DP7 D.R.O, (2) 3-Point Steadies, Distance between Centres: 1,200mm, 250mm 3-Jaw Chuck, 310mm 4-Jaw Chuck, Quick Change Tooling, Quick Change Toolpost. S/No. VT0227384
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 18: Startrite Vertical Bandsaw
Startrite Vertical Bandsaw with Blade Welder, Table Size: 480 x 480mm, Throat Size: 450mm. S/No. 105251
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 19: Jones & Shipman 1011P Surface Grinder
Jones & Shipman 1011P Surface Grinder with 24” x 12” Magnetic Chuck & Coolant. S/No. 53765159124
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 20: Sodick Mark 21, Model FS-750 EDM Wire Eroder
Sodick Mark 21, Model FS-750 EDM Wire Eroder with Working Area: 1,000 x 600mm, Tank Size: 1,300 x 950 x 550mm (depth). S/No. S750-N036 (08/1991)
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 21: Jones & Shipman Cylindrical Grinder
Jones & Shipman Cylindrical Grinder with 160mm 3-Jaw Chuck & Coolant
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 21A: Qty of Grinding Equipment
Qty of Grinding Equipment
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described