2886 - CNC Lathes, Vertical Machining Centres, Bed Mills & Toolroom Equipment no longer required by Micron Machining Services Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These items are located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 11
Lot 6: Doosan Puma VT750 CNC Vertical Lathe
Doosan Puma VT750 CNC Vertical Lathe with Doosan Fanuc i Series Control, Chuck Size: 450mm, Swarf Conveyor, Swarf Bin, Tooling & Jaws. S/No. MT0023-001104 (08/2014)
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 6, 6A & 6B
Combination of Lots 6, 6A & 6B
6 - Doosan Puma VT750 CNC Vertical Lathe with Doosan Fanuc i Series Control, Chuck Size: 450mm, Swarf Conveyor, Swarf Bin, Tooling & Jaws. S/No. MT0023-001104 (08/2014)
6A - 630mm 6-Jaw Chuck
6B - 630mm 4-Jaw Chuck
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
6 | Doosan Puma VT750 CNC Vertical Lathe |
6A | 630mm 6-Jaw Chuck |
6B | 630mm 4-Jaw Chuck |
Lot 8: Gemini Grupo Goratu GHT5 G2 CNC Lathe
Gemini Grupo Goratu GHT5 G2 CNC Lathe with Fagor Control, Distance between Centres: 6m, Chuck Size: 800mm, 480mm 3-Jaw Chuck, Swarf Conveyor, 2-Point Steady, 3-Point Steady, 4-Point Steady, Quick Change Tooling. S/No. 26013 (2007)
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 9: Gemini Grupo Goratu GHT5 G2 CNC Lathe
Gemini Grupo Goratu GHT5 G2 CNC Lathe with Fagor Control, Distance between Centres: 3m, Chuck Size: 900mm, Swarf Conveyor, 3-Point Steady, Tooling. S/No. 23024 (2007)
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 10: Hwacheon Hi-Tech 200B CNC Lathe
Hwacheon Hi-Tech 200B CNC Lathe with Fanuc Series Oi-TD Control, 250mm 3-Jaw Chuck, Swarf Conveyor, 12-Station Turret, Tooleye, Tailstock. S/No. M015362F45F (06/2014)
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 11: Takisawa TS-20 CNC Lathe
Takisawa TS-20 CNC Lathe with Fanuc Control, 12-Station Turret, 250mm 3-Jaw Chuck, Tailstock. S/No. 831113
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 12: Colchester Electronic Mastiff CNC Gap Bed Lathe
Colchester Electronic Mastiff CNC Gap Bed Lathe with GE Fanuc Series 20-T Control, Distance between Centres: 1,800mm, 310mm 3-Jaw Chuck, (2) 3-Point Steadies, Quick Change Tooling. S/No. EM0043 (1995)
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 12, 12A, 12B & 12C
Combination of Lots 12, 12A, 12B & 12C
12 - Colchester Electronic Mastiff CNC Gap Bed Lathe with GE Fanuc Series 20-T Control, Distance between Centres: 1,800mm, 310mm 3-Jaw Chuck, (2) 3-Point Steadies, Quick Change Tooling. S/No. EM0043 (1995)
12A - Quick Change Tooling – suitable for Colchester Machine
12B - Quick Change Tooling – suitable for Colchester Machine
12C - Quick Change Tooling – suitable for Colchester Machine
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 16: Colchester Mastiff Lathe
Colchester Mastiff Lathe with 310mm 3-Jaw Chuck, Polishing Attachment, Toolpost 3-Point Steady, Distance between Centres: 3,000mm. S/No. 8/0209/03616
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lot 17: Colchester Triumph 2500 Gap Bed Lathe
Colchester Triumph 2500 Gap Bed Lathe with Newall DP7 D.R.O, (2) 3-Point Steadies, Distance between Centres: 1,200mm, 250mm 3-Jaw Chuck, 310mm 4-Jaw Chuck, Quick Change Tooling, Quick Change Toolpost. S/No. VT0227384
Please Note: This lot is located in the West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described