2881 - CNC Sheet Metal Machinery, Fabrication & Material Handling Equipment no longer required by Portastor Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots with the exception of lot 3 are located in York. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 3 is located in Redditch
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 103
Lot 3: Bystronic PR 150 Ton x 4100mm Over Bed CNC Press Brake
Bystronic PR 150 Ton x 4100mm Over Bed CNC Press Brake with Cybelec DNC 1200 6 Axis Control, (Y1, Y2, X, Z1, Z2, R) Auto Crowing, Laser Guards, Hydraulic Top Tool Clamping, Side and Rear safety Fences, Tooling Carousel. S/No 04430044 (2004)
Please Note: For convenience of sale, this lot has prepared for collection, located in Redditch. A dismantling and loading onto suitable vehicle charge of £500 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Lot 9: LVD Strippit Global 20 Ton Capacity CNC Turret Punch
LVD Strippit Global 20 Ton Capacity CNC Turret Punch with Fanuc 180i-PB Control, Punching Area: 1250mm x 2500mm or 1250mm x 5000mm, (with one full reposition) Axis Travel: 1275mm x 2525mm, 30-Station Thick Turret Configuration with (3) x 88.9mm Auto Index Stations, (3) x Programmable Sheet Clamps. S/No. 27904 (2001)
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 11: Selection of Wilson Punch Tooling
Selection of Wilson Punch Tooling
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 36: Tigfeed 40 Automatic
Tigfeed 40 Automatic. S/No. TA111020755
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 37A: Welders & Welding Equipment
Welders & Welding Equipment
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 38: Rotator Length 40ft x 9ft 3" Wide Approx.
Rotator Length 40ft x 9ft 3" Wide Approx.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 39: Rotator Length 40ft x 10ft Wide Approx.
Rotator Length 40ft x 10ft Wide Approx.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 40: Rotator Length 35ft x 8ft Wide Approx.
Rotator Length 35ft x 8ft Wide Approx.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 41: (3) Idlers & (1) Motored Welding Rotator, 11ft x 17" Approx. Adjustable
(3) Idlers & (1) Motored Welding Rotator, 11ft x 17" Approx. Adjustable
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 59: (2) 8" Hand Grinders 110 Volt
(2) 8" Hand Grinders 110 Volt
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.