2863 - Phase 2 Unique Offering of XYZ Machining Centres & CNC Lathes, Toolroom Machinery and Inspection Equipment formerly used by Deeley Precision
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Redditch, Birmingham and Watford. Please see individual lots for loading information and charges.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 41
Lot 1: XYZ 200 TC.LT CNC Lathe
XYZ 200 TC.LT CNC Lathe with Sinumerik Control, 3 Jaw 210mm Chuck, 12 Station Turret, Swarf Conveyor, Tooleye, Back End Tooling, (4) Live Tools, Shop Turn, Hydra Feed Bar Feed. S/No. 0505010 (2010)
Please Note: This lot is located in Watford. Unfortunately, there are no loading facilites on site. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: XYZ Mini Mill KR MF 560 Vertical Machining Centre
XYZ Mini Mill KR MF 560 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 610mm x 370mm, 20 Station Tool Changer, BT40 Back End Tooling. S/No. MF284 (2007)
Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Lot 3: XYZ 710 Vertical Machining Centre
XYZ 710 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 800mm x 450mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMT00112 (2007)
Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Lot 4: Haas TM-1P Vertical Machining Centre
Haas TM-1P Vertical Machining Centre with Haas Control, Table Size 1210mm x 270mm, 10 Station Tool Changer, BT40 Back End Tooling. S/No. 1101764 (01/2013)
Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Lot 6: XYZ 560 Vertical Machining Centre
XYZ KR MF560 Vertical Machining Centre with Sinumerik Control, Table Size 610mm x 370mm, 12 Station Tool Changer, BT40 Back End Tooling. S/No. MF247 (2006)
Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Lot 8: XYZ Mini Mill 560 Vertical Machining Centre
XYZ Mini Mill 560 Vertical Machining Centre with Sinumerik 828D Control, Table Size 610mm x 370mm, 12 Station Tool Changer, BT40 Tooling. S/No. MF383 (01/12)
Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Lot 10: XYZ Vulcan 250 TC MX-1B Lathe
XYZ Vulcan 250 TC MX-1B Lathe with Siemens Sinumerik 828D Control, 12 Station Turret, 250mm 3 Jaw Chuck, Tooleye, Swarf Conveyor, Tailstock, VDI 40 Tooling, (2) x Back End Live Tooling and Centre, Parts Catcher, Sets of Jaws. S/No. 0505069 (2005 verified by XYZ). Multi-feed MX-1B Barfeed. S/No. 5091
Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 10A: VDI40 Tooling
VDI40 Tooling
Please Note: This lot is located in Redditch. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 10B: VDI40 Tooling
VDI40 Tooling
Please Note: This lot is located in Redditch. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 10, 10A & 10B
Combination of lots 10, 10A & 10B
10. XYZ Vulcan 250 TC MX-1B Lathe with Siemens Sinumerik 828D Control, 12 Station Turret, 250mm 3 Jaw Chuck, Tooleye, Swarf Conveyor, Tailstock, VDI 40 Tooling, (2) x Back End Live Tooling and Centre, Parts Catcher, Sets of Jaws. S/No. 0505069 (2005 verified by XYZ). Multi-feed MX-1B Barfeed. S/No. 5091
10A. VDI40 Tooling
10B. VDI40 Tooling
Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described. ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 10 | XYZ Vulcan 250 TC MX-1B Lathe |
| 10A | VDI40 Tooling |
| 10B | VDI40 Tooling |