2861 - Final Phase – TOS Plano Mill, Skoda & TOS Lathes, TOS Grinder, Holroyd Milling Machines, Welders & Various Capacity Overhead Cranes surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 29
Lot 3: Tos Kurim FRPD16X30 4-Head Plano Mill
Tos Kurim FRPD16X30 4-Head Plano Mill, Table size: 6m x 1.6m. S/No. 39920 (1967)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 7: Skoda SIU 250T Heavy Duty Centre Lathe
Skoda SIU 250T Heavy Duty Centre Lathe, 11m Between Centres, 4 Way Bed, Internal Grinding Head, Milling/Drilling Head, 2500mm Dia Chuck, Steadies. S/No. 22730 (1985)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 12: TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder
TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder, Magnetic Chuck 2m x 410mm. S/No. 168160201
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 13: TOS Type SU90A Lathe
TOS Type SU90A Lathe, 920mm 4-Jaw Chuck, 3.3m Distance Between Centres. S/No. 0419173 (1975)
This lot is subject to a late release and will be available for collection from 1st March 2020
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 14: Holroyd Model 5A Pump Rotor Milling Machine
Holroyd Model 5A Pump Rotor Milling Machine
Please Note: The high bid on this lot is subject to final acceptance and release by Howden CKD Compressors s.r.o. Please contact the auctioneer for further information.
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 15: Holroyd Model 5AC Pump Rotor Milling Machine
Holroyd Model 5AC Pump Rotor Milling Machine
Please Note: The high bid on this lot is subject to final acceptance and release by Howden CKD Compressors s.r.o. Please contact the auctioneer for further information.
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 15A: Various Spares for Holroyds
Various Spares for Holroyds, Drive Shaft, 4-Jaw Chuck, 22'' and Spare Motors
Please Note: The high bid on this lot is subject to final acceptance and release by Howden CKD Compressors s.r.o. Please contact the auctioneer for further information.
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 14, 15 & 15A
Combination lof lots 14, 15 & 15A
Lot 14 - Holroyd Model 5A Pump Rotor Milling Machine
Lot 15 - Holroyd Model 5AC Pump Rotor Milling Machine
Lot 15A - Various Spares for Holyroyds, Drive Shaft, 4-Jaw Chuck, 22'' and Spare Motors
Please Note: The high bid on this lot is subject to final acceptance and release by Howden CKD Compressors s.r.o. Please contact the auctioneer for further information.
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 14 | Holroyd Model 5A Pump Rotor Milling Machine |
| 15 | Holroyd Model 5AC Pump Rotor Milling Machine |
| 15A | Various Spares for Holroyds |
Lot 20: Stavostroj ZTS KSP 02 Chopsaw
Stavostroj ZTS KSP 02 Chopsaw. S/No. C6-571/83 (1983)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 23: MEZ Brumov WTU 315-3 Welder
MEZ Brumov WTU 315-3 Welder. S/No. 88-21349 (1987)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.