2845 - Cincinnati, Chiron, Hitachi Seiki, Hurco, OKK HM-40 & Mazak Machining Centres, Hitachi Seiki & Tornos Schaublin CNC Lathes
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Birmingham. Please see individual lots for loading information.
Lot No. 6 is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 11A is located in High Wycome. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for this item will be as follows:
Up until Wednesday 18th December 2019
and then from:
Monday 6th January 2020 to Thursday 16th January 2020
(There will be no clearance on site between 19th December
2019 and 3rd January 2020 Inclusive)
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 39
Los 1: OKK HM-40 Horizontal Twin Pallet Machining Centre
OKK HM-40 Horizontal Twin Pallet Machining Centre with Fanuc 16i-M Control, Pallet Size 400 x 400mm, Full B Axis with 0.001 deg Table, 60 ATC, Renishaw MI 12 Interface (No Probe Included), High Pressure Through Spindle Coolant, BT40 Spindle Taper, 6,000rpm Spindle, Spare Spindle, Coolant Tank, Swarf Conveyor, (37) BT40 Toolholders (Back End Only), Machine Weight 9100kgs. S/No. 326 (1999) Manuals
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £450 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 2: Mazak Nexus 510C-II Vertical Machining Centre
Mazak Nexus 510C-ll CNC Vertical Machining Centre with Mazatrol Matrix Nexus Control System, Max Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm 4th Axis 360 degrees, Din40 Spindle Taper, 30 Station ATC, Through Spindle Coolant, Kitagawa MR250 4th Axis, Swarf Conveyor, Renishaw Probe Interface (Please Note: No probe). S/No 192263 (2007)
Please Note: There is no tooling with this lot.
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 3: Hurco VM1 Machining Centre
Hurco VM1 Machining Centre with Hurco Max Control, 16 ATC, Table Size 760mm x 350mm, 6” Machine Vice, Qty of BT 40 Tooling. S/No. H-V11662 (2006)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 4: Hurco VMX 30 Vertical Machining Centre
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 4a: Qty of CAT40 Tool Holders
Qty of CAT40 Tool Holders and Collets and Bench
Please Note: This lot is located in Birmingham
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of Lots 4 & 4A
Combination of Lots 4 & 4A
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
and
Qty of CAT40 Tool Holders, Collets and Bench
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 4 | Hurco VMX 30 Vertical Machining Centre |
| 4a | Qty of CAT40 Tool Holders |
Los 5: Hurco VSX24 Vertical Machining Centre
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 5a: Qty of CAT40 Tool Holders and Collets
Qty of CAT40 Tool Holders and Collets
Please Note: This lot is located in Birmingham
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of Lots 5 & 5A
Combination of Lots 5 & 5A
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
and
Qty of CAT40 Tool Holders and Collets
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 5 | Hurco VSX24 Vertical Machining Centre |
| 5a | Qty of CAT40 Tool Holders and Collets |
Los 6: Cincinnati Milacron Dart 750 Vertical Machining Centre
Cincinnati Milacron Dart 750 Vertical Machining Centre with 20-Station Tool Changer, Table Size 950mm x 520mm. S/No. 7054-A00-RA-0138 with Tool Changer (in need of a new plate)
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.